3D Printer 12V Turbo Blower Fan

Nylon Insert Hex LockNut - M5

02.00.06

$0.13 $0.10

These Nylon locknuts contain a washer mounted inside the nut that enhances its hold on the nut.

Nylock Nut 4mm Stainless Steel

02.00.05

$0.09 $0.08

This product is a nut that has a nylon insert that prevents it from loosening or coming off. It is made of stainless steel and has a size of 4mm. It can be used with bolts or screws of the same size and thread pitch.

Eccentric Spacer 6mm

04.00.49

$0.69 $0.50

These Eccentric Spacers are the perfect solution for creating a pre-load from the V-Wheels to the V-Slot Linear Rail. Pro-Tip: Eccentric Spacers comes with a divot on the outside which allows you to know at all times where the smallest part of the CAM hole is located.

Solid V Wheel Kit

05.00.10

$1.93 $1.50

Complete kit includes all assembly hardware. Precise smooth motion for light to medium duty applications ie: 3D Printer. Flat surface with a V shaped outer edge allows the wheel to center ride in the track of V-Slot Linear Rail and C-Beam Linear Rail . Flat profile designed to work effortlessly with a belt on a belt and pinion system as well as lead screw and belt driven systems.

Precision Shim - 10x5x1mm

04.00.25

$0.17 $0.15

These Precision Shims create the perfect fill and alignment on our V Wheel kits.

Xtreme Solid V Wheel Kit

05.00.08

$2.16

Complete kit with all the components necessary for wheel assembly. A heavy-duty alternative to Delrin Wheels. Suitable during applications where substantial force and weight are introduced into the system. Perfect when additional accuracy is needed and less compression than in the Delrin is desired. Flat profile designed to work effortlessly with a belt on a belt and pinion system as well as lead screw and belt driven systems.

LM8UU 8mm 8x15x24mm Linear Ball Bearing Bush Bushing (Short)

05.00.73

$1.51 $1.00

Material Housing heat treated plated hard chrome steel. Cage Engineering plastics.Main dimensions ID 8mm,OD 15mm,Length 17-24mm.

DRV-8825 Stepper Motor Driver

03.00.06

$3.02 $2.30

Model Number : DRV-8825 Brand : Arduino STEPPER MOTOR DRIVER MODULE FOR ARDUINO AND RASPBERRY PI DIY PROJECTS INVOLVING STEPPER MOTOR DRIVING SUCH AS 3D PRINTERS, LASER CUTTER AND ENGRAVER AND DESKTOP CNC MACHINE. SPECIFICATIONS: SIX DIFFERENT STEPS RESOLUTIONS: FULL STEP, HALF STEP,

1m GT2 Rubber Timing Belt Width 6mm ( German )

12.11.02

$2.38

LENGTH : CUT PER METER ON DEMAND WIDTH : 6MM BELTS ARE SUPPLIED AS ONE LENGTH WHICH IS EASILY CUT TO THE REQUIRED LENGTH, ENOUGH FOR MOST VARIANTS OF 3D PRINTER DESIGNS. GOOD ANTI-CRACKING PERFORMANCE, AND SMALL EXTENDING RATE LONG SERVICE LIFE, BEARING WEAR AND TEAR, RESISTANT TO OIL, HEAT

Flanged Bearing 688ZZ 8x16x5

05.00.14

$1.43

These bearings fit perfectly when coupled with any plate with a 16mm hole. Designed to work with applications such as the 8mm Acme Lead Screw.

3D PRINTER EXTRUDER FAN 4X4 12V

05.00.62

$1.68 $1.33

Size: 40x40x10mm Bearing Structure: double ball Voltage: DC 12V

Double T-Nut - M5

10.00.149

$0.26 $0.20

Slide in Double Tee Nuts are a fundamental part of every build adding more flexibility to our system modularity.

1m GT2 Rubber Timing Belt Width 10mm ( German )

12.12.02

$2.81 $2.50

LENGTH : CUT PER METER ON DEMAND WIDTH : 10MM BELTS ARE SUPPLIED AS ONE LENGTH WHICH IS EASILY CUT TO THE REQUIRED LENGTH, ENOUGH FOR MOST VARIANTS OF 3D PRINTER DESIGNS. GOOD ANTI-CRACKING PERFORMANCE, AND SMALL EXTENDING RATE LONG SERVICE LIFE, BEARING WEAR AND TEAR, RESISTANT TO OIL, HEAT

GT2 20 Tooth 5mm Bore Timing Belt Pulley

04.00.03

$2.25 $1.30

IT GIVES BETTER SMOOTHNESS AND ACCURACY OF POSITIONING, RESULTING IN BETTER PRINTING QUALITY

4PIN To 6PIN 1m Long Cable For Nema 17 Motor

05.00.38

$1.43 $0.60

Brand : Other Type : Cables Compatible with : Electronic Accessories

Limit Switch (MS.2 - 19.5 x 10.0 x 6.0 mm)

04.00.72

$0.56 $0.20

Brand : Other Type : Electronic Accessories

Low Profile Screws M5 X 8MM (50 Pack)

10.00.182

$2.12 $2.00

Pack Quantity : 50 Type : Screws Material : Steel

Low Profile Screws M5 X 10MM (50 Pack)

10.00.183

$2.12

Pack Quantity : 50 Type : Screws Material : Steel

Black 2020 Slots Corner Angle L Brackets Connector Fasten Aluminum Profile Accessories

05.00.91

$1.12

Type: Corner Brackets DIY Supplies: Metalworking Process: Casting Surface treatment: Sand blasting color: Black Material: aluminum size: 20*20*17mm Package Contents: Aluminum alloy fixed corner piece Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Black Angle Corner Connector

05.00.93

$1.94

"MOUNT THIS CORNER TO V-SLOT LINEAR RAIL USING M5X8MM LOW PROFILE SCREWS AND M5 TEE NUTS." COMPATIBLE WITH V-SLOT LINEAR RAIL ANODIZED ALUMINUM COLOR: BLACK

Lock Collar

04.00.212

$0.91 $0.70

A metal or plastic component that fits onto a shaft and prevents axial movement.

3D PRINTER BED LEVELING M3 SCREW WITH SPRING AND HAND KNOB

04.00.128

$1.12 $0.50

A set of four components that can be used to adjust the height and level of the hot bed or platform of 3D printers. They consist of M3 screws, springs, knobs and an L-wrench.

V-Slot 20x40 Linear Rail

$2.51 $2.00

High-quality aluminium linear rail profile with an extremely smooth v groove on all 4 sides. It's precise, easy to work with and allows you unlimited design control through its modular nature. V-Slot Linear Rail is the ultimate solution combining both linear motion and a modular, structural framing system. It's lightweight yet rigid and provides an ultra smooth track for precise motion. In 2013, OpenBuilds created V-Slot Linear Rail and has added a library of compatible modular Parts which today is known as the OpenBuilds System. Over 1,000,000 feet of V-Slot has been shipped to businesses, classrooms, laboratories and makers all over the world! Much like working with lumber, you can cut V-Slot on a chop saw (using a metal blade) or even use a hacksaw. From there, you simply use a screw driver to make the connections.

V-Slot 20x20 Linear Rail

$1.68 $1.33

High-quality aluminum linear rail profile with an extremely smooth v groove on all 4 sides. It's precise, easy to work with and allows you unlimited design control through its modular nature.

Stepper Motor Flexible Coupling 5x8mm

05.00.69

$2.25

These Flexible couplings are used to transmit torque from a stepper motor to a lead screw, thus creating the movement in an actuator.

E3D V6 Long distance J-head Hotend with Cooling fan ,heater,thermistor and fan duct built-in for 1.75mm 3D Printer

03.00.141

$14.04 $10.00

E3D V6 Long distance J-head Hotend with Cooling fan ,heater,thermistor and fan duct built-in for 1.75mm 3D Printer

NTC 100K 3950 Thermistors-big head Size with dupont

05.00.29

$2.38 $2.00

NOMINAL RESISTANCE: R25(25℃)（USUAL）1.5K,2K,5K,10K,20K,30K,47K,50K,100K,200K,500K AND SO ON. RESISTANCE ACCURACY: ±1%，±2%,±3% B R25/50: （USUAL）3435K,3600K,3950K,3990K,4100K,4200K AND SO ON B ACCURACY: ±1% TEMPERATURE RANGE: -40℃～+300℃ MAX RATED POWER: 45MW RESISTANCE TEMPERATURE COEFFICIENT: -2～-5%/℃ SUGGESTED PARAMETERS: R25℃=100K B25/50=3950K(±1%) PACKAGE INCLUDE :1X NTC 3950 THERMISTORS-BIG HEAD SIZE WITH DUPONT

GT2 20 Teeth synchronous Idler Pulley Bore 5mm

04.00.10

$2.25

GT 20 Synchronous Tooth Hysteresis Wheel Pulley Bore 5mm With GT2 Bearing Timing Belt Width 10mm Specifications: Type: AF Type with Bearing Timing Pulley Model Number: 2GTPitch: 2mm Tooth Number: 20 Width: 10mm Bore: 5mm Material

Slide T-Nut 5mm (10 PCS)

02.00.13

$2.55 $2.00

Used for : Aluminum Extrusion with Profile 20x20mm

Stepper Motor Driver A4988 Module

03.00.07

$2.55

LOW RDS ON TOTAL RESISTANCE BETWEEN THE DRAIN AND SOURCE OUTPUTAUTOMATIC CURRENT DECAY MODE DETECTION AND SELECTIONSYNCHRONOUS RECTIFICATION FOLLOW POWER DISSIPATIONINTERNAL UNDER VOLTAGE LOCKOUT UVLOCROSS CURRENT PROTECTION3.3 AND 5V COMPATIBLE LOGICSUPPLYTHERMAL SHUT DOWN CIRCUITRYGROUND FAULT PROTECTION LOAD SHORT CIRCUIT PROTECTIONOPTIONAL STEP FIVE MODES.

T Joining Plate (Aluminum)

06.09.03

$2.25 $2.00

Type : 3D Printer Accessories Brand : Other

90 Degree Joining Plate Black (Aluminum)

06.04.03

$2.27 $2.00

Square up your joints with 90 degree precision. Mounts externally to V-Slot Linear Rail with 10mm Low Profile M5 Screw and M5 Tee Nuts (sold separately)

1 meter 3D Printer PTFE Teflon Tube Remote Nozzle feed Guide 2 x 4

12.01.01

$1.99

1 METER 3D PRINTER PTFE TEFLON TUBE REMOTE NOZZLE FEED GUIDE 2 X 4

Optical Endstop Optical Limit Switch

03.00.73

$2.25 $1.50

FOR REPRAP, YOU CAN USE ONE OPTO-SWITCH FOR EACH AXIS TO DEFINE ITS POSITION. THE OPTO SWITCHES ALSO HELP TO PROTECT THE MACHINE FROM MOVING PAST ITS INTENDED RANGE AND DAMAGING ITSELF.

90 Degree Joining Plate Black (Acrylic)

06.06.04

$0.57 $0.50

Square up your joints with 90 degree precision. Mounts externally to V-Slot Linear Rail with 10mm Low Profile M5 Screw and M5 Tee Nuts (sold separately)

Arduino Mega 2560 With USB Cable

03.00.01

$22.33

The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

Nylock Nut 3mm Stainless Steel

02.00.32

$0.07

MADE FROM HIGH QUALITY 304 STAINLESS STEEL KNOWN FOR ITS DEPENDABLE AND RIGID STRENGTH AS WELL AS ITS CORROSION RESISTANT QUALITY.

T-Nuts - M5 (10 PCS)

02.00.16

$1.99 $1.50

T-Nuts are an essential part to have in any build, adding flexibility and expanding modulatory making the system more robust.

1m Transparent Teflon Tube PTFE 2 x 4

12.14.01

$2.38 $1.50

Now you can see your filament while it transfer from the roll to your hot-end with this Transparent Teflon Tube

3D PRINTER EXTRUDER FAN 3X3 12V

05.00.61

$1.43 $1.33

"Size: 30x30x10mm Bearing Structure: double ball Voltage: DC 12V"

Stainless Steel Angel Corner 90 Degree Two Hole

05.00.90

$0.86 $0.60

Brand : Other Type : 3D Printer Accessories

4pcs sticked Anti Vibration for 3D Printers and other machines 25mm (2.5Cm) Diameter

$0.86

Reduce the noise and improve the print quality of your 3D printer with these easy-to-use anti vibration feet. Just stick them under your printer and enjoy a quieter and smoother printing experience.

Eccentric Spacer 1/4 inch

04.00.50

$1.12 $1.00

These Eccentric Spacers are the perfect solution for creating a pre-load from the V-Wheels to the V-Slot Linear Rail. Pro-Tip: Eccentric Spacers comes with a divot on the outside which allows you to know at all times where the smallest part of the CAM hole is located.

F623zz Bearing 3x10x4 Flanged

05.00.19

$0.86

Model: F623ZZ Color: Gray Material: Chrome Steel Size: 3x10x4mm Suitable for: 3D printer

3D Printer Extruder FAN 5x5 12V

05.00.63

$1.99

Brand : Gostime Are batteries needed to power the product or is this product a battery : No Is this a Dangerous Good or a Hazardous Material, Substance or Waste that is regulated for transportation, storage, and/or disposal? : No Type : 3D Printer Accessories

1m GT2 Rubber Timing Belt Width 6mm

12.09.02

$2.00 $1.40

There is no limit to the types of linear motion you can create by making an actuator based on one of these GT2 Timing Belts. They are popular for fast and lightweight movement.

SMPS Power Supply 12V/30A

08.05.02

$12.53 $11.00

Power supply switching type SMPS 12v regulated & adjustable 15% more or less voltage, up to 30A max current Not to be used as car battery charger / inverter for Surveillance cameras, alarms, engineering projects You can get different sources with 3 pin out voltage regulators.

Smart LCD 128 x 64 With Controller & SD Card

03.00.122

$15.12 $11.50

This is a smart LCD display that can control your 3D printer without a PC. It has a 128 x 64 dot matrix screen, a rotary encoder, and an SD card reader. It can connect to your RAMPS 1.4 board using the included smart adapter. You can print your 3D models from the SD card, adjust the parameters, and monitor the status of your printer.