Filter by price
Recently viewed products
3D Printer Extruders & Accessories
Control filament feeding with 3D printer extruders, gears, motors and compatible extrusion accessories.
MK8-RED EXTRUDER-LEFT (Long Arm)
1.75mm Filament Golden Right Left Long Hand 3D Printers Parts Block MK8 Extruder This modified MK8 Extruder has a filament guide tube,all screws,spare drive gear,and upgraded Bowden tube fitting,for CR-10 3D Printer.Our design gives complete support of flexibles from the intake and output ends. It will also allow to print faster with sustained quality and no risk for grinding the filament. Full metal aluminum alloy,diy aluminum block,need to assemble by yourself.with better stronger pressure pushing the filament into the printer nozzle Color:gold material:metal Size:1.75 mm Direction:Left Package Contents: 1 set * frame 8 * screws 6 * accessories Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
MK8 All-Metal Remote Extruder for 1.75mm 3D Printer Parts
A metal extruder for 3D printers that can feed 1.75mm filament smoothly and accurately.
3D PRINTER LEFT PART 1.75MM FILAMENT MAKERBOT MK10 EXTRUDER FEEDER DEVICE
3D PRINTER LEFT PART 1.75MM FILAMENT MAKERBOT MK10 EXTRUDER FEEDER DEVICE is a metal part that can be used to feed filament to the hotend of a 3D printer. It is compatible with 1.75mm filament and MK10 extruder nozzles. It has a left-hand orientation, which means it is installed on the left side of the printer. It is made of aluminum, which is durable, lightweight and corrosion-resistant.
3D printer parts RepRap aluminum alloy left-hand Makerbot Replicator 1 & 2 Extruder Upgrade Replicator 2X Extruder (no motor)
3D printer parts Reprap aluminum alloy left-hand Makerbot Replicator 1 & 2 Extruder Upgrade Replicator 2X Extruder (no motor) Name : reprap alumniu8m alloy left-hand Markerbot replicator 1&2 extruder upgrade Replicator 2x extruder upgrade Matrieal : akuminum alloy Crafrs : sandblasting oxidation Direction : left-hand Range : reprap makerbot replicator 1&2 3d printer parts
3D Printer Accessories RepRap bulldog Extruder Parts Remote Proximity Full Metal E3D J-Head
This product is a metal extruder part for 3D printers that can be used as a direct drive or a remote extruder. It is compatible with 1.75mm and 3mm filaments and various hot ends such as E3D, J-head, and MK8. It has a symmetrical design, a 3:1 gear ratio, and an adjustable idler lever.
3D Printer Bowden MK8 Extruder Hotend Kit Driver Feeder - Nozzle Filament - TEVO Anet A8 RepRap Prusa i3 Makerbot
Without : Motor Without : Motor Mount
3D PRINTER MK8 EXTRUDER ALUMINUM FRAME BLOCK DIY KIT
Extruder is the most important component for 3D printer. The extruder is responsible of delivering the plastic material in smooth, continuous way at certain flow rate. The Key to printing resolution is mostly depending on the Extruder.
3D Printer Titan Extruder Fully Kits
Upgrade your 3D printer with the Titan Extruder, a high-performance, lightweight, and versatile extruder that works with any filament and any HotEnd. The Titan Extruder has a 3:1 gear ratio, a precision-milled hobbed gear, and an adjustable idler lever for powerful and reliable extrusion.
All Metal Bowden Remote Extruder Kit 1.75mm (MK8)
THIS KIT IS A COMPLETE SETUP FOR 3D PRINTER BOWDEN EXTRUDER. MAIN EXTRUDER BODY COMES PRE-ASSEMBLED FOR YOUR CONVENIENCE. THIS IS RELIABLE AND VERY DURABLE CONSTRUCTION AND BUILD QUALITY IS VERY GOOD. FILAMENT DRIVE GEAR HAS VERY SHARP TEETH AND WILL PROVIDE PERFECT GRIP. MATERIAL: METAL COLOR: GOLD DIRECTION: TOWARD LEFT, TOWARD RIGHT (CHOOSE AS YOU NEED) SIZE: 90X70MM
MK8-GOLDEN EXTRUDER-RIGHT (Long Arm)
1.75mm Filament Golden Right Left Long Hand 3D Printers Parts Block MK8 Extruder This modified MK8 Extruder has a filament guide tube,all screws,spare drive gear,and upgraded Bowden tube fitting,for CR-10 3D Printer.Our design gives complete support of flexibles from the intake and output ends. It will also allow to print faster with sustained quality and no risk for grinding the filament. Full metal aluminum alloy,diy aluminum block,need to assemble by yourself.with better stronger pressure pushing the filament into the printer nozzle Color:gold material:metal Size:1.75 mm Direction:Right Package Contents: 1 set * frame 8 * screws 6 * accessories Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
3D printer Wades extruder hobbed bolt
This is a hobbed bolt that is designed for the Wades extruder, a popular 3D printer extruder. It is used to grip and feed the filament into the hotend. It has two different depths of teeth for optimal performance.
3D Printer Parts Extruder Upgrade MK8 Extruder 3D Printer Bowden Extruder Nozzle 0.4mm Feed Inlet Diameter 1.75 Filament
Upgrade your 3D printer with this high-quality MK8 extruder that can handle 1.75mm filament with ease and precision. This extruder is made of durable aluminum alloy and compatible with most models of 3D printers, such as Creality Ender 3, Ender 5, CR-10, and more. It features an adjustable bolt to control the extruder gear pressure and a smooth feeding mechanism to prevent filament breakage. With this extruder, you can enjoy better performance and print quality for your 3D projects.
MK8 Stainless Steel Extruder Drive Gear 5mm Shaft 40 teeth
Type : 3D Printer Accessories Brand : Other
EXTRUDER COOLING HEAT SINK 40X40X11MM
40 X 40MM COOLING FIN HEAT SINK FOR MAKERBOT 3D PRINTER DIMENSION: 40 X 40 X 11MM THIS HEAT SINK IS DESIGNED FOR MAKERBOT. IT IS A GOOD CHOICE FOR COOLING YOUR 3D PRINTER EXTRUDER.
MK7 Stainless Steel Extruder Drive Gear Hobbed Gear For RepRap 3D Printer 5mm
Type : 3D Printer Accessories
MK8 Extruder Gear 26 Tooth (Brass) 5mm
A brass gear with 26 teeth and 5mm bore diameter, compatible with MK8 extruders and 3D printers.
Heated Bed Spring & Wade extruder spring
These springs are essential parts for 3D printers that can improve the stability and performance of the heated bed and the extruder. They are made of durable metal and have different sizes and shapes to suit different models and applications.
M7 Heated Bed Spring & Wade extruder spring
Item specifics :- Type : 3d printer spring Wire diameter : 1.2mm Outer diameter : 7.5mm Inner diameter : 7mm Height : 21mm Number of turns : 9 turns Apply to : 3d printer platform
- 1
- 2