You have no items in your shopping cart.

End Mill

End Mill 2 Flutes 0.25 mm

11.01.01
43.00 ج.م.‏

Brand: Other Type: Drill Bits Is It a Set: No

Carbide End Mill Bit 1 flute 1.15 mm

11.01.02
76.00 ج.م.‏

Brand: Other Type: Drill Bits Is It a Set: No

End Mill 2 Flutes 0.3 mm

11.02.01
43.00 ج.م.‏

Brand: Other Type: Drill Bits Is It a Set: No

End Mill 2 Flutes 10mm

11.00.09
152.00 ج.م.‏

Brand : Other Type : Drill Bits Is It a Set : No

end mill 2 flutes 2mm

11.00.03
127.00 ج.م.‏

Brand: Other Type: Drill Mills Is It a Set: No

End Mill 2 Flutes 3mm

11.00.04
127.00 ج.م.‏

Brand: Other Type: Drill Mills Is It a Set: No

Carbide End Mill Bit 4 Flute D:1 H:3 Shank:4

11.00.151
404.00 ج.م.‏

D:1mm H:3mm Shank:4

Carbide End Mill Bit 4 Flutes D:2 H:3 Shank:4

11.00.152
413.00 ج.م.‏

D:4mm H:3mm Shank:4

Carbide End Mill Bit 4 Flute D:1.5 H:3 Shank:4

11.01.151
413.00 ج.م.‏

D:1.5mm H:3mm Shank:4

Carbide End Mill Bit 4 Flutes D:6 H:16 Shank:6

11.00.155
455.00 ج.م.‏

D:6mm H:16mm Shank:6

Carbide End Mill Bit 4 Flutes D:4 H:11 Shank:4

11.00.154
438.00 ج.م.‏

D:4mm H:1mm Shank:4

End mill 1 flute 2mmx6mm for aluminum Shank :3.175

11.00.132
118.00 ج.م.‏

Optimized for Aluminum, composite structures such as High-density polyethylene (HDPE) or polyethylene high-density (PEHD). Suitable for all-round slotting, peripheral, ramping, plunging, helical interpolation or high-speed machining Corner style with square ends, suitable for ramping on blank surface, slotting and radial cutting. Significant reduced part-costs due to higher surface quality, stability and process security.

End Mill 2 Flutes 4mm

11.00.05
178.00 ج.م.‏

Brand : Other Type : Drill Mills Is It a Set : No

2 Straight Flutes Bits D6x6x22mm

11.00.148
505.00 ج.م.‏

Brand : Other Type : Electronic Accessories

End mill 2 flutes 5mm - Drill Mills

11.00.06
185.00 ج.م.‏

Brand: Other Type: Drill Mills Is It a Set: No

End Mill Half Straight Bit D:3.175 x 1 x 3mm

11.00.124
76.00 ج.م.‏

Weitol half straight bit Matrial is high quality tungsten carbide Applied in acrylic, PVC,two-color plate, organic plate Sharp and wear-resisting, smooth chip removal without sticking bit Not easy to break and long service life

End Mill 2 Flutes 6x22.5mm

11.00.07
178.00 ج.م.‏

Brand: Other Type: Drill Bits Is It a Set: No

End Mill 2 Flutes 6x20mm

11.02.07
202.00 ج.م.‏

Shank diameter: 6mm Cutting edge diameter: 6mm Cutting Length:20mm Total length: 50mm Material: Tungsten steel

End Mill 2 Flutes 8mm

11.00.08
202.00 ج.م.‏

Brand: Other Type: Drill Bit Sharpeners Is It a Set: No

End mill 4 Flutes 3mm

11.00.11
168.00 ج.م.‏

Brand : Other Type : Drill Bits Is It a Set : No

End Mill 4 Flutes 4mm

11.00.12
178.00 ج.م.‏

Brand: Other Type: Drill Bits Is It a Set: No

End mill 4 Flutes 5mm

11.00.13
178.00 ج.م.‏

Brand: Other Type: Drill Mills Is It a Set: No

End Mill 4 Flutes 6mm

11.00.14
185.00 ج.م.‏

Brand: Other Type: Drill Bits Is It a Set: No

End Mill 4 Flutes 8mm

11.00.15
202.00 ج.م.‏

Brand: Other Type: Drill Bits Is It a Set: No

End Mill 4 Flutes 10mm

11.00.16
219.00 ج.م.‏

Brand: Other Type: Drill Bits Is It a Set: No

End mill 1 flute 4mmx17mm for aluminum Shank : 4

11.03.138
202.00 ج.م.‏

Optimized for Aluminum, composite structures such as High-density polyethylene (HDPE) or polyethylene high-density (PEHD). Suitable for all-round slotting, peripheral, ramping, plunging, helical interpolation or high-speed machining Corner style with square ends, suitable for ramping on blank surface, slotting and radial cutting. Significant reduced part-costs due to higher surface quality, stability and process security.

End mill 1 flute 4mmx15mm for aluminum Shank : 4

11.01.138
219.00 ج.م.‏

Optimized for Aluminum, composite structures such as High-density polyethylene (HDPE) or polyethylene high-density (PEHD). Suitable for all-round slotting, peripheral, ramping, plunging, helical interpolation or high-speed machining Corner style with square ends, suitable for ramping on blank surface, slotting and radial cutting. Significant reduced part-costs due to higher surface quality, stability and process security.

End mill 1 flute 6mmx17mm for aluminum Shank :6

11.00.139
337.00 ج.م.‏

Optimized for Aluminum, composite structures such as High-density polyethylene (HDPE) or polyethylene high-density (PEHD). Suitable for all-round slotting, peripheral, ramping, plunging, helical interpolation or high-speed machining Corner style with square ends, suitable for ramping on blank surface, slotting and radial cutting. Significant reduced part-costs due to higher surface quality, stability and process security.

End mill 1 flute 1.5mmx5mm for aluminum Shank :3.175

11.01.137
118.00 ج.م.‏

Optimized for Aluminum, composite structures such as High-density polyethylene (HDPE) or polyethylene high-density (PEHD). Suitable for all-round slotting, peripheral, ramping, plunging, helical interpolation or high-speed machining Corner style with square ends, suitable for ramping on blank surface, slotting and radial cutting. Significant reduced part-costs due to higher surface quality, stability and process security.

End mill 1 flute 2mmx8mm for aluminum Shank :3.175

11.01.132
118.00 ج.م.‏

Optimized for Aluminum, composite structures such as High-density polyethylene (HDPE) or polyethylene high-density (PEHD). Suitable for all-round slotting, peripheral, ramping, plunging, helical interpolation or high-speed machining Corner style with square ends, suitable for ramping on blank surface, slotting and radial cutting. Significant reduced part-costs due to higher surface quality, stability and process security.

End Mill Carbide 3 Flute 2 mm x 8 mm For Aluminum Shank: 4 mm

11.01.135
171.00 ج.م.‏

Cutting material: aluminum Weapon diameter: 2 mm Weapon length: 8 mm Shank: 4 mm Ind mile length: 50 mm Number of Flutes: 3 Flute Model: HRC55 Brand: JAGUAR

End Mill Carbide 3 Flute 4 mm x 12 mm For Aluminum Shank: 4 mm

11.03.135
200.00 ج.م.‏

Cutting material: aluminum Weapon diameter: 4 mm Weapon length: 12 mm Shank: 4 mm Ind mile length: 50 mm Number of Flutes: 3 Flute Model: HRC55 Brand: JAGUAR

End Mill Carbide 3 Flute 5 mm x 15 mm For Aluminum Shank: 5 mm

11.04.135
214.00 ج.م.‏

Cutting material: aluminum Weapon diameter: 5 mm Weapon length: 15 mm Shank: 5 mm Ind mile length: 50 mm Number of Flutes: 3 Flute Model: HRC55 Brand: JAGUAR