Arduino Modules
Explore Arduino-compatible modules for communication, timing, storage, control and rapid electronic prototyping.
RC522 RFID Card Reader Module Kit for Arduino
This is a kit that allows you to read and write RFID cards and tags using Arduino or other microcontrollers. It includes a RC522 module, a S50 card, a keychain tag, and some jumper wires. It supports ISO 14443A/MIFARE mode and operates at 13.56 MHz.
Laser sensor Module 650nm 6mm 5V 5mW Red Laser Dot Diode KY-008 for Arduino
The Laser sensor Module 650nm 6mm 5V 5m is a mini laser diode module that emits a red dot beam with a wavelength of 650 nm. It can be used for various applications such as laser pointer, laser level, laser engraving, laser detection, and more. It has three pins for easy connection and a fixed bolt hole for easy installation.
Linear Hall Magnetic Module For Arduino AVR PIC
Linear Hall magnetic module and a digital interface, built-in 13 LED build a simple circuit to produce a magnetic field warning lamp 13 comes with digital interfaces of the LED, the linear Hall sensor magnetometer access number 3 interface, when linear Hall magnetometer Sensor senses a key signal, LED lights, otherwise off. Specs: Length: 42mm Width: 15mm Material: PCB
Arduino Pyroelectric Infrared IR PIR Motion Sensor Detection Module
The Arduino Pyroelectric Infrared IR PIR sensor is a device that can detect motion by sensing changes in infrared radiation emitted by objects. It can be used for security, automation, or interactive projects with Arduino.
LASER Source 5mW RED - DOT Shape - With Focus
LASER Source 12 mm With Focus
DC-DC Step Down Converter 4 Digital LED
Brand : Other Type : Microcontroller Boards
DC-DC Step Down Converter with USB
DC TO DC CONVERTER 9V/12V/24V TO 5V 2A USB STEP DOWN POWER MODULE CAR CHARGER FOR MOBILE POWER, MOBILE PHONES, TABLET AND ANY USB 5V POWERED DEVICES. INPUT: 7.5V-28V OUTPUT: 5V / 3A CONVERSION EFFICIENCY: 96% (MAX) SWITCHING FREQUENCY: 1.5MHZ (MAX) TYPICAL 1MHZ WORKING TEMPERATURE: -40 ℃~+ 85 ℃ LOAD CAPACITY: MAXIMUM OUTPUT 3A, TYPICAL 2A SIZE: 43MM X 16MM X 5MM (LXWXH) PACKAGE INCLUDE ": 1X DC-DC STEP DOWN CONVERTER 9V/12V/24V TO 5V/2A USB
8 Channel Relay Module With Optocoupler for Arduino AVR PIC RPI
This is a 5V 8-Channel Relay interface board be able to control various appliances, and other equipments with large current It can be controlled directly by Micro-controller (Arduino UNO, MEGA, PRO, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)5V 4-Channel Relay interface board, and each one needs 50-60mA Driver Current Equiped with high-current relay, AC250V 10A ; DC30V 10A
Relay Module 4 Channel
This is a module that can control up to four high-voltage devices individually using low-voltage signals. It is compatible with various microcontrollers and sensors and has optocouplers for isolation and protection.
Relay Module 2 Channel - 5Vdc
This is a module that has two 5V relays that can switch high voltage or current devices using low voltage or current signals. It has a jumper that can select the trigger mode: high level or low level. It also has an LED indicator and a protection diode.
Relay Module 2 Channel - 12Vdc
This is a 5V 2-Channels Relay module, It can be controlled directly by a wide range of micro controllers such as Arduino, AVR, PIC, ARM and MSP430. 2 relays are included in this module, with “NC” ports means “Normally connected to COM” and “NO” ports means “Normally open to COM”. This module is also equipped with 2 LEDS to show the status of relays.Maximum load: AC 250V/10A, DC 30V/10ADriving
1 Channel 5V Relay Module with High/Low Level Trigger
This is a module that can switch on or off a high voltage or current device using a low voltage or current signal. It has a relay that can be triggered by either high or low level signals. It also has an LED indicator and a protection diode.
4 Output Channel SSR Solid State Relay 5V Module (Active at HIGH Level)
4 Output Channel SSR Solid State Relay 5V Module (Active at HIGH Level)
Relay 24v DC Coil 5 pin
Relay 24v DC Coil 5 pin. Suitable for Arduino Modules applications and engineering projects.
SSR-25DA (Solid State Relay 25A) Input 80-250Vdc / Output 24-380Vac
SSR2DA IS AC TO DC SOLID STATE RELAY MODULE .25AMPS AND 380V FEATURESHighly reliable , compact size designed to offer users maximum simplicityDC to ACMounting method bolts fixedmade in Taiwan
SSR-40DA (Solid State Relay 40A) Input 3-32Vdc / Output 24-380Vac
Part Number: SSR-25DA Input voltage: 3-32V DC; Output voltage: 24-380V AC Output current: 40A; Working Voltage: 250V, Net Weight: 113g; Item size: 6.2 x 4.5 x 2.3cm (L*W*H)
Heatbed Current Controller Mosfet Module MKS MOS25 25A
*Completely solve the hot bed power is too large and the load current issue *Under the premise of normal cooling, it work stable under I(Max)=10A, the current must not exceed 10A while the process working *If you need anything greater or equal to 10A this module is a must! For example, if your total power usage is 120W and you have 12V power supply, then it means at least 10A is needed (10X12=120W). *As ChiTu controller board is only capable of 10A this setting will not work. To make it work,you need this extra power module. *If the power is used improperly, it may burn. *Dimensions: 60*50mm
DC-DC Step Down Converter 8A (4V~40Vdc to 1.25V~36Vdc)
Max 8A 200W DC-DC Step Down Buck Converter Power Supply XL4016 PWM Adjustable 4-40V To 1.25-36V Step-Down Board Module XH-M401