Products tagged with 'switch module'
10 Position DIP Switch 2.54mm
CONTACT RESISTANCE : 50MΩ 24VDC/100MA (AT INITIAL);100MΠTYPICAL, 24VDC/100MA (AFTER LIFE TEST) : 100MΩ TYPICAL, 24VDC/100MA (AFTER LIFE TEST);EACH SIZE : 12 X 10 X 11 MM / 0.47" X 0.4" X 0.43" (L*W*H)
6 Position DIP Switch 2.54mm
CONTACT RESISTANCE : 50MΩ 24VDC/100MA (AT INITIAL);100MΠTYPICAL, 24VDC/100MA (AFTER LIFE TEST) : 100MΩ TYPICAL, 24VDC/100MA (AFTER LIFE TEST);EACH SIZE : 12 X 10 X 11 MM / 0.47" X 0.4" X 0.43" (L*W*H)
8 Position DIP Switch 2.54mm
8 Position DIP Switch 2.54mm is a device that can be used to control the flow of electric current in a circuit. It has eight switches that can be turned on or off individually by sliding or rocking the actuator. It has a terminal pitch of 2.54 mm, which means the distance between the pins is 2.54 mm. It can be mounted on a printed circuit board (PCB) through holes or surface mount technology (SMT). It is made of plastic and metal, and it may have different colors, shapes and sizes depending on the manufacturer and model. 8 Position DIP Switch 2.54mm can help you customize the functionality and configuration of your electronic devices.
Slide Type Switch Module 1-Bit 2.54mm 1 Position Way DIP Red Pitch
Slide Type Switch Module 1-Bit 2.54mm 1 Position Way DIP Red Pitch
Slide Type Switch Module 2.54mm 2 Position Way DIP Red Pitch
Slide Type Switch Module 2.54mm 2 Position Way DIP Red Pitch DIP Package size and shape switch 2 Way , Suitable for digital inputs (High/Low) with very good materials.
SW1 - ON-OFF With Lamb (Up to 10A-125VAC)
Brand : Other Type : 3D Printer Accessories
Press 4pin - Push button (12x12x4 mm Tack Switch Standard Stem)
12 x 12 Standard Tact Switch , Stem size 4mm , Operating life : 100K cycles , Operating Force : 100, 130, 160 & 250 gf.
Press 4pin - Push button (12x12x8 mm Tack Switch Standard Stem)
12 x 12 Standard Tact Switch , Stem size 8mm , Operating life : 100K cycles , Operating Force : 100, 130, 160 & 250 gf.
