Bluetooth UART RS232 serial converter Module Operating Frequency Band 2.4GHz unlicensed ISM band Bluetooth Specification V2.0+EDR Output Power Class 2 Operating Voltage 3.3V Host Interface USB/UART Audio Interface None Flash Memory Size 8Mbit.
Features:
CSR Bluetooth Chip Solution
Bluetooth v2.0+EDR Compliant
UART interface and with baud rate setup function
Built-in antenna.
Coverage up to 30ft.
Incredible small size with 3.3V input, and RoHS Compliant
Working current: While pairing 30mA, paired 8mA
Frequency: 2.4GHz ISM band
Baud rate is 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 user manually set up.
Default Baud Rate: 9600,8,1,n
Support for 8Mbit External Flash Onboard
Support for 802.11 Co-Existence Product Description
Storage Temperature: -40 to 85 degrees Celsius
Size : 28 mm x 15 mm x 2.35 mm
Used for GPS navigation system, water and electricity gas Automatic Reading Meter, The industrial field in control system
The factory default parameters:
Baud rate: 9600, N, 8, 1. Pairing code: 1234
AT command set as follows:
1, Test communication
Send: AT (return OK, A seconds press once again)
Return: OK
2, Change Bluetooth serial interface communication baud rate
Send: AT + BAUD1
Return: OK1200
Send: AT + BAUD2
Return: OK2400
1---------1200
2---------2400
3---------4800
4---------9600
5---------19200
6---------38400
7---------57600
8---------115200
9---------230400
A---------460800
B---------921600
C---------1382400
Not recommended in more than 115200 baud rate, the signal interference will make the system not stability
3, change bluetooth name
Send: AT + NAMEname
Return: OKname
Parameter name: will set the current name, which was the name of the search to Bluetooth. Within 20 characters.
Example: send AT + NAME bill_gates
Back to OKname
now Bluetooth name is bill_gates
Parameters can power lost save, modify it only need once. The PAD service can see change Bluetooth name
4, Change Bluetooth pairing password
Send: AT + PINxxxx
Return: OKsetpin
Example: send AT + PIN8888
Back to OKsetpin
now Bluetooth pairing password is 8888, module's default password g is 1234.
Parameters can power lost save, modify it only need once.
JUTHOURTECH