Juthour-Tech | 40 × 40 cm 3D Printer Parts

MK8-RED EXTRUDER-LEFT (Long Arm)

C-00-61

300.00 EGP

1.75mm Filament Golden Right Left Long Hand 3D Printers Parts Block MK8 Extruder This modified MK8 Extruder has a filament guide tube,all screws,spare drive gear,and upgraded Bowden tube fitting,for CR-10 3D Printer.Our design gives complete support of flexibles from the intake and output ends. It will also allow to print faster with sustained quality and no risk for grinding the filament. Full metal aluminum alloy,diy aluminum block,need to assemble by yourself.with better stronger pressure pushing the filament into the printer nozzle Color:gold material:metal Size:1.75 mm Direction:Left Package Contents: 1 set * frame 8 * screws 6 * accessories Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

3D PRINTER LEFT PART 1.75MM FILAMENT MAKERBOT MK10 EXTRUDER FEEDER DEVICE

C-00-62

280.80 EGP

3D PRINTER LEFT PART 1.75MM FILAMENT MAKERBOT MK10 EXTRUDER FEEDER DEVICE is a metal part that can be used to feed filament to the hotend of a 3D printer. It is compatible with 1.75mm filament and MK10 extruder nozzles. It has a left-hand orientation, which means it is installed on the left side of the printer. It is made of aluminum, which is durable, lightweight and corrosion-resistant.

3D PRINTER MK8 EXTRUDER ALUMINUM FRAME BLOCK DIY KIT

C-01-64

275.00 EGP

Extruder is the most important component for 3D printer. The extruder is responsible of delivering the plastic material in smooth, continuous way at certain flow rate. The Key to printing resolution is mostly depending on the Extruder.

3D printer parts RepRap aluminum alloy left-hand Makerbot Replicator 1 & 2 Extruder Upgrade Replicator 2X Extruder (no motor)

C-00-63

340.00 EGP

3D printer parts Reprap aluminum alloy left-hand Makerbot Replicator 1 & 2 Extruder Upgrade Replicator 2X Extruder (no motor) Name : reprap alumniu8m alloy left-hand Markerbot replicator 1&2 extruder upgrade Replicator 2x extruder upgrade Matrieal : akuminum alloy Crafrs : sandblasting oxidation Direction : left-hand Range : reprap makerbot replicator 1&2 3d printer parts

3D Printer Bowden MK8 Extruder Hotend Kit Driver Feeder - Nozzle Filament - TEVO Anet A8 RepRap Prusa i3 Makerbot

C-00-64

561.60 EGP

Without : Motor Without : Motor Mount

3D Printer Accessories RepRap bulldog Extruder Parts Remote Proximity Full Metal E3D J-Head

C-01-63

550.00 EGP

This product is a metal extruder part for 3D printers that can be used as a direct drive or a remote extruder. It is compatible with 1.75mm and 3mm filaments and various hot ends such as E3D, J-head, and MK8. It has a symmetrical design, a 3:1 gear ratio, and an adjustable idler lever.

3D Printer Titan Extruder Fully Kits

C-02-64

898.56 EGP

Upgrade your 3D printer with the Titan Extruder, a high-performance, lightweight, and versatile extruder that works with any filament and any HotEnd. The Titan Extruder has a 3:1 gear ratio, a precision-milled hobbed gear, and an adjustable idler lever for powerful and reliable extrusion.

All Metal Bowden Remote Extruder Kit 1.75mm (MK8)

C-00-65

900.00 EGP

THIS KIT IS A COMPLETE SETUP FOR 3D PRINTER BOWDEN EXTRUDER. MAIN EXTRUDER BODY COMES PRE-ASSEMBLED FOR YOUR CONVENIENCE. THIS IS RELIABLE AND VERY DURABLE CONSTRUCTION AND BUILD QUALITY IS VERY GOOD. FILAMENT DRIVE GEAR HAS VERY SHARP TEETH AND WILL PROVIDE PERFECT GRIP. MATERIAL: METAL COLOR: GOLD DIRECTION: TOWARD LEFT, TOWARD RIGHT (CHOOSE AS YOU NEED) SIZE: 90X70MM

MK8-GOLDEN EXTRUDER-RIGHT (Long Arm)

C-01-65

300.00 EGP

1.75mm Filament Golden Right Left Long Hand 3D Printers Parts Block MK8 Extruder This modified MK8 Extruder has a filament guide tube,all screws,spare drive gear,and upgraded Bowden tube fitting,for CR-10 3D Printer.Our design gives complete support of flexibles from the intake and output ends. It will also allow to print faster with sustained quality and no risk for grinding the filament. Full metal aluminum alloy,diy aluminum block,need to assemble by yourself.with better stronger pressure pushing the filament into the printer nozzle Color:gold material:metal Size:1.75 mm Direction:Right Package Contents: 1 set * frame 8 * screws 6 * accessories Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Nema 17 Stepper Motor 17HS8401 48mm

A-01-92

700.00 EGP

17HS8401S Nema 17 Stepper Motor – 48 mm With Cable Low noise. Low heat. Smooth operation. Good acceleration performance. Color: Black (Surface Treatment)