Carbon monoxide (CO) is a colorless, odorless, and toxic gas that can cause serious health problems or even death if inhaled. Therefore, it is important to monitor the level of CO gas in the environment and take appropriate actions if it exceeds a safe limit. The MQ-7 CO Carbon Monoxide Coal Gas Sensor Module is a device that can help you do that. It is a low-cost and easy-to-use module that can detect the presence of CO gas in the air and output an analog voltage that corresponds to the concentration of CO gas. The module consists of a gas sensor, a heating element, a potentiometer, and an LED indicator. It can be connected to an Arduino or a Raspberry Pi using analog or digital pins. The module has a wide detecting range from 10 to 10,000 ppm and can be calibrated to adjust the sensitivity. The module operates by using a chemical reaction between the CO gas and a conductive metal oxide to produce a current. The current changes according to the amount of CO gas in the air and affects the resistance of the sensor. The resistance is then converted to a voltage by a circuit and sent to the output pin. The module requires a heating cycle to work properly, which means it alternates between high and low heating voltages at different time intervals. The module consumes less than 150 mA at 5 V and can operate at temperatures from -10 to 50°C. The MQ-7 CO Carbon Monoxide Coal Gas Sensor Module is a great choice for hobbyists and students who want to experiment with gas sensing and Arduino or Raspberry Pi programming.
JUTHOURTECH