Juthour-Tech | M3x4mm High Tensile Socket Head Cap Screws (White)

Nylock Nut 3mm Stainless Steel

02.00.32

$0.07

MADE FROM HIGH QUALITY 304 STAINLESS STEEL KNOWN FOR ITS DEPENDABLE AND RIGID STRENGTH AS WELL AS ITS CORROSION RESISTANT QUALITY.

M5x8mm High Tensile Socket Countersunk Screws - Pack 50

10.00.72

$1.12 $0.80

Pack Quantity: 50 Type: Nuts & Bolts Material: Steel Brand: Other

Optical Endstop Optical Limit Switch

03.00.73

$2.25 $1.50

FOR REPRAP, YOU CAN USE ONE OPTO-SWITCH FOR EACH AXIS TO DEFINE ITS POSITION. THE OPTO SWITCHES ALSO HELP TO PROTECT THE MACHINE FROM MOVING PAST ITS INTENDED RANGE AND DAMAGING ITSELF.

M355 - Brass Cylinder Knurled Round Molded-in Insert Embedded Nuts - pack of (5)

01.16.10

$0.70

Made of brass material, featured with heat resistance, used on injection molding for tightly fixing, no need to countersink a hole because insert has guide pilot.

3D Printer j-head Remote feed connector fittings 1.75mm/10mm (Stainless steel)

04.00.21

$0.86 $0.50

Size: 10mm Material: Stainless Steel Filament Type: 1.75 Teflon Tube Size: 2 x 4

E3D V5 Extruder Heat Sink 1.75mm

05.00.125

$2.25

Brand : Other Type : PExtruder Heat The Tube Threaded Size : 6mm

Smooth Idler Pulley Wheel

05.00.02

$1.68

"This idler pulley can be mounted in a variety of fashions to fit your design. It can be plate mounted as well as direct V-Slot mounted using a Tee Nut and a Slot Washer. Brand : OpenBuilds Type : 3D Printer Accessories

M3x6mm High Tensile Socket Head Screws - Pack 50

10.00.02

$0.86 $0.50

Brand: Other Type: 3D Printer Accessories

GX16- 4 Pole Metal Male Female Panel Connector

05.00.84

$1.68 $1.50

A metal connector with four pins that can be used for signal or power transmission. It has a male part for panel mount and a female part for cable. It is durable, waterproof and compatible with various applications.

Low Profile Screws M5 X 8MM (50 Pack)

10.00.182

$2.12 $2.00

Pack Quantity : 50 Type : Screws Material : Steel

Horizontal Toggle Clamps, Small Hold Down Clamps for Woodworking 201-L Quick Release Hand Toggle Clamp Tools 60 Lb Holding Capacity

05.00.122

$5.05

201-L Toggle clamps for woodworking - an absolute essential hand tools, features a unique retractable clamping action. Mini toggle clamp, an excellent clamp for jobs with lighter demand! * Easy to use * Fast loading and unloading * Stable clamping force * Allowing you to focus on getting things done with accuracy and speed * The toggle clamps provide an adjustable and secure hold fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more. Specifications: Holding capacity: 27kg/60 lbs Clamp Size: 3.1"x0.9"x0.7"/8.1x2.3x1.8cm(L*W*H) Handle opens angle: 75° Bar opens angle: 90 ° Material: cold rolled carbon steel, galvanized coating, rubber cushion

SW7 - ON/OFF Switch PCB mounted

04.00.71

$0.30 $0.25

Brand : Other Type : 3D Printer Accessories

0.4mm E3D V5&V6 J-head Nozzle ( Stainless Steel )

04.00.195

$1.68 $1.00

Nozzle size : 0.4mm Brand new and high quality : 3D Printer Accessories Full Metal 3D M6 threaded nozzle Compatible With E3D V6 And E3D V5 J-Head Hotend And M6 Threaded Extruder Material : Stainless Steel Packing Included: X1

M3x15mm Flat Head Machine Screws - Pack 50

10.01.24

$1.82 $0.50

Brand : Other Material : Steel quantity : 50 Type : Machine Screws Size: 3x15mm

M8 Steel Threaded Flat Head Rivet Nut - Pack 50

11.00.120

$2.30 $1.80

Brand : Other Material : Brass Pack Quantity : 50 Type : Rivet Nuts

Press 4pin - Push button (12x12x4 mm Tack Switch Standard Stem)

04.00.85

$0.30 $0.25

12 x 12 Standard Tact Switch , Stem size 4mm , Operating life : 100K cycles , Operating Force : 100, 130, 160 & 250 gf.

V-Slot 20x20 Linear Rail

$1.68 $1.33

High-quality aluminum linear rail profile with an extremely smooth v groove on all 4 sides. It's precise, easy to work with and allows you unlimited design control through its modular nature.

M3x20mm High Tensile Socket Countersunk Screws - Pack 50

10.01.18

$1.12 $0.80

Brand : Other Material : Steel Quantity : 50 Type : Countersunk Bolts

693zz Bearing 3x8x4 Flanged

05.00.11

$1.86

For use in special conditions. The miniature ball bearing F-693-ZZ is small and suitable for installation with limited space and on thin shafts. With the flange, it can be fixed axially, e.g. in bore holes. It can withstand very high speeds. It has metric special dimensions.

Slide T-Nut 5mm (10 PCS)

02.00.13

$2.55 $2.00

Used for : Aluminum Extrusion with Profile 20x20mm

M3x12mm High Tensile Socket Head Screws - Pack 50

10.00.05

$0.86 $0.50

Type : 3D Printer Accessories Brand : Other

Arduino JoyStick Breakout Module Shield PS2 Joystick Game Controller

03.00.63

$3.67 $1.40

Product Description: Tested in: Arduino UNO, MEGA, PRO / Due / Leonardo / Raspberry Pi 1. This is a two-way rocker 10K resistor, with the joystick in a different direction, tap the resistance vary. 2. This module uses a 5V supply, the original state X, Y readout voltage of 2.5V or so. 3. When pressed with the direction of the arrow, the readout voltage values with increasing, up to 5V; press the arrow in the opposite direction, the readout voltage reduction , a minimum of 0V.

M3x10mm High Tensile Socket Head Screws - Pack 50

10.00.04

$0.86 $0.60

Type : 3D Printer Accessories Brand : Other

Drop In T-Nut - M3 (20 PCS)

02.00.07

$3.37 $3.00

Did you forget to add a Tee Nut? Drop In Tee Nuts are here to save you, just add them to any location on a V-Slot or C-Beam Linear Rail.

M3x8mm High Tensile Socket Head Screws - Pack 50

10.00.03

$0.86 $0.50

Brand : Other Type : 3D Printer Accessories

Iron Nut 3mm - Pack 50

10.00.102

$0.47 $0.40

magnetic switch

04.00.217

$0.56 $0.35

Brand : Other Type : Electronic Accessories

M3x15mm High Tensile Socket Head Screws - Pack 50

10.00.06

$0.86 $0.60

Pack Quantity : 50 Type : Head Cap Bolts Material : Steel Brand : Other

SW4 ON/OFF/ON (Up to 6A 250V AC) 3Pin

04.00.83

$0.56 $0.35

Brand : Other Type : 3D Printer Accessories

2 x AA Battery Holder + On/Off Switch

06.04.06

$0.56 $0.35

2 X AA BATTERY HOLDER + ON/OFF SWITCH MATERIAL: PLASTIC, METAL CABLE LENGTH : 11CM / 4.7 " COLOR: BLACK NET WEIGHT: 64 GM

2 x AAA Battery Holder + On/Off Switch

06.00.06

$0.56

A 2 x AAA Battery Holder + On/Off Switch is a device that can hold two AAA batteries and provide a 3V power supply for your projects. It has a switch that allows you to turn on or off the power easily. It also has wire leads that you can connect to your circuit board or other components.

3d printer throat PTFE inside stainless steel feed tube

04.00.96

$1.12 $0.70

A 3D printer throat with a PTFE tube inside, made of stainless steel, compatible with 1.75 mm filament and MK8 extruders.

M3 Copper Spacer 12mm F/M (10 PCS)

04.00.42

$1.68

Pack Quantity : 10 Type : Spacers Material : Copper Brand : Other

300 Piece / Box m3 Screws Hex Socket Bolt Nuts Machine Headdress Lock Combination

14.01.02

$5.62

Brand : Juthour-Tech Material : Steel Pack Quantity : 300 Type : Nuts & Bolts M3x4mm Alin Black or White Screws (20) M3x6mm Alin Black or White Screws (20) M3x8mm Alin Black or White Screws (20) M3x10mm Alin Black or White Screws (20) M3x12mm Alin Black or White Screws (20) M3x15mm Alin Black or White Screws (20) M3x18mm Alin Black or White Screws (20) M3x20mm Alin Black or White Screws (20) M3x25mm Alin Black or White Screws (20) Iron Nut 3mm (100)

F608zz bearing 8x22x7

05.00.17

$1.53 $1.20

F608zz Metric Size Miniature Flanged Ball Bearings have deep groove geometry for high speeds and supporting both radial and axial loads. These F608zz Metric Size Miniature Flanged Ball Bearings are for use in applications that involve combined radial and axial loads and a need for high running accuracy at high rotational speeds.

M3x8mm High Tensile Socket Head Cap Screws (White) - Pack 50

10.01.03

$0.86 $0.50

Brand : Other Material : Steel null : 50 Type : Head Cap Bolts

Hammerhead T Screw M8x20mm

02.00.23

$0.43

Hammer Head T Bolt T Head M8 for T-Slot Aluminum Extrusion 45 Series Material: carbon steel nickel plated the size: m8 * 20

3D PRINTER EXTRUDER FAN 4X4 12V

05.00.62

$1.68 $1.33

Size: 40x40x10mm Bearing Structure: double ball Voltage: DC 12V

Clear Plastic Jewelry Box Small Organizer Storage Container

Stock1

$0.86

Color : Transparent Type : Jewelry Boxes and Organizers Brand : Other Material : Plastic Height : 2.3CM Width : 6.6CM Designed with 10 rectangle compartments and the compartment can be adjusted by pulling the plastic sheet It can be used to store earrings, bead, finger ring or other small jewelry, also is used for storing fishing hook, fish lure bait or other small tool kit This case features 6 removable ..

3D Printer j-head Remote feed connector fittings 1.75mm/10mm

04.00.22

$0.86 $0.50

Brand : Other Type : 3D Printer Accessories

Slide T-Nut 4mm (10 PCS)

02.00.12

$1.99 $1.40

Used for: Aluminum Extrusion with Profile Thread Diameter: M4 Metric Slot Width: 4mm Total Size: 10 x 10 x 5mm Material: Carbon Steel Surface Finish: Nickel Plated Package Weight: 16g Package included quantity: 10pcs

M3 Copper Spacer 6mm F/M (10 PCS)

04.00.40

$1.12

Pack Quantity : 10 Type : Spacers Material : Copper Brand : Other

M3x12mm Phillips Flat Head Machine Screws - Pack 50

10.00.24

$0.56 $0.40

Pack Quantity : 50 Type : Machine Screws Material : Steel Brand : Other Size : 3x12 mm

M3x20mm Phillips Flat Head Machine Screws - Pack 50

10.01.25

$0.69

Pack Quantity : 50 Type : Machine Screws Material : Steel Brand : Other Size : 3x20 mm

Anti Vibration Rubber Legs For 3D Printer - Pack 4

05.00.119

$1.12

Anti Vibration Rubber Legs For 3D Printer - Pack 4

OpenRail Gantry Plate 20mmx6mm (Acrylic)

06.09.05

$1.12 $1.00

Just add Delrin V Wheel and you’ll have the perfect gantry to run on your build made of OpenRail Linear Rail.

Spacer Block 6mm (Acrylic)

06.01.05

$0.86 $0.75

The V-Slot Spacer Blocks were designed to be used in conjunction with the V-Slot Gantry Plate. "This Spacer Block allows you to raise the V-Slot Gantry Plate up away from the rail 12mm, so that you can run transmission components, such as a Belt Drive or Threaded Rod underneath the V-Slot Gantry Plate." Product Details Qty. 1 M5 Tapped Holes to allow mounting to the V-Slot Gantry Plate 3 Holes that allow for mounting of full size OpenBuilds Wheels Anodized Aluminum Color: Black OpenBuilds Part CAD Models and Drawings Brand : OpenBuilds Type : 3D Printer Accessories

E3d Throat with teflon tube M6x35mm For 1.75mm filament

04.00.59

$1.68 $0.70

he throat or barrel is the part through which the filament slides from the extruder motor to the printer fuser. It has an inner Teflon tube that does not melt with the heat that is used to route the strand of straight filament to the nozzle. Characeristics: • Length 35mm • M6 thread • Teflon inner tube

M2x6mm Star Pan Head Screw ( pack 100 )

10.00.166

$1.60 $1.40

A pack of 100 screws that have a star-shaped head and a M2 thread size. They are made of carbon steel and can be used to fasten machine parts or electronic components.

727 Power Supply 5V-20A-100W

08.08.02

$19.66 $15.00

Input: 110V/220V AC; Output: DC 5V 20A max. Output voltage can be adjusted 15%. Two sets of output Channel. Safety features: Automatic overload cut-off, over Voltage cut-off, automatic thermal cut-off, short circuit protection. It is perfect for all 5V projects, such as WS2811 2801 WS2812B LED Strip Pixel Light, CCTV Camera, Security System, Computer Project, etc. There is no fan inside the case, silent running. Metal case with many holes makes heat dissipation more efficient. Compact small size, high efficiency, high reliability, stable performance. Indoor use only

M3x4mm High Tensile Socket Head Cap Screws (White) - Pack 50