1. Home
  2. Tools
  3. CNC Router Bits
  4. End Mills
  5. End mill 1 flute 2mmx8mm for aluminum Shank:3.175
End mill 1 flute 2mmx8mm for aluminum Shank :3.175
End mill 1 flute 2mmx8mm for aluminum Shank :3.175 End mill 1 flute 2mmx8mm for aluminum Shank :3.175 End mill 1 flute 2mmx8mm for aluminum Shank :3.175

End mill 1 flute 2mmx8mm for aluminum Shank:3.175

Optimized for Aluminum, composite structures such as High-density polyethylene (HDPE) or polyethylene high-density (PEHD). Suitable for all-round slotting, peripheral, ramping, plunging, helical interpolation or high-speed machining Corner style with square ends, suitable for ramping on blank surface, slotting and radial cutting. Significant reduced part-costs due to higher surface quality, stability and process security.
Availability: Out of stock
SKU: B-02-10
196.56 EGP
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options

Optimized for Aluminum, composite structures such as High-density polyethylene (HDPE) or polyethylene high-density (PEHD).
Suitable for all-round slotting, peripheral, ramping, plunging, helical interpolation or high-speed machining
Corner style with square ends, suitable for ramping on blank surface, slotting and radial cutting.
Significant reduced part-costs due to higher surface quality, stability and process security.

Customers who bought this item also bought

Nylock Insert Hex LockNut - M5

02.00.06
5.00 EGP

These Nylon locknuts contain a washer mounted inside the nut that enhances its hold on the nut.

Eccentric Spacer 1/4 inch

C-02-48
56.16 EGP

These Eccentric Spacers are the perfect solution for creating a pre-load from the V-Wheels to the V-Slot Linear Rail. Pro-Tip: Eccentric Spacers comes with a divot on the outside which allows you to know at all times where the smallest part of the CAM hole is located.

Nema 17 Stepper Motor 17HS8401 48mm

A-01-92
700.00 EGP

17HS8401S Nema 17 Stepper Motor – 48 mm With Cable Low noise. Low heat. Smooth operation. Good acceleration performance. Color: Black (Surface Treatment)

End mill 1 flute 1.5X5X38.5 for aluminum Shank:3.175

B-01-10
196.56 EGP

Aluminum-Specific End Mill – 1 Flute Size: 1.5×5×38.5 mm – Shank: 3.175 mm Tool Type: Single-flute end mill (1 Flute) Cutting Diameter: 1.5 mm Flute Length: 5 mm Overall Length: 38.5 mm Shank Diameter: 3.175 mm Material: High-quality solid carbide (optimized for aluminum)

Only registered users can write reviews