Arduino UNO CNC Shield v3

This board is widely used for driver expansion board of engraving machin. There are total 4 ways slots for stepper motor driver modules (Model A4988 - It sold separately at our store ), and it can drive 4 ways stepper motors each up to 2A. Each way stepper motor has two I/O ports and it means 6 I/O ports can manage 3 stepper motors. It is very convenient to operate.

Be the first to review this product

Availability: 2 in stock

SKU: 03.00.26

Old price: $7.86

Price: $4.00

Qty:

A4988 Driver CNC Shield Expansion Board for Arduino is an Arduino shield which controls four stepper motors by using four A4988 stepper motor driver boards. The board’s pinout is compatible with open source CNC control firmware Grbl. While the pinout makes it possible for the board to be used as an Arduino shield, the board can also be controlled by external signals using the parallel male headers to drive the stepper motors. By that way the shield actually becomes a general purpose control board and can be interfaced with any microcontroller system.

Another good feature of A4988 Driver CNC Shield Expansion Board for Arduino is one of the motors can clone the movement of one of the other two motors. Since there are lots of CNC or 3D printer systems that have double motors for single axis, this feature makes the board a pretty good choice to be used with these systems.

arduino (52)

Customers who bought this item also bought

Nylon Insert Hex LockNut - M5

02.00.06

$0.13 $0.10

These Nylon locknuts contain a washer mounted inside the nut that enhances its hold on the nut.

DRV-8825 Stepper Motor Driver

03.00.06

$3.02 $2.30

Model Number : DRV-8825 Brand : Arduino STEPPER MOTOR DRIVER MODULE FOR ARDUINO AND RASPBERRY PI DIY PROJECTS INVOLVING STEPPER MOTOR DRIVING SUCH AS 3D PRINTERS, LASER CUTTER AND ENGRAVER AND DESKTOP CNC MACHINE. SPECIFICATIONS: SIX DIFFERENT STEPS RESOLUTIONS: FULL STEP, HALF STEP,

Delrin V Wheel Kit

05.00.09

$2.25

A complete kit that includes everything you need for assembly. The smooth and precise Delrin wheel works best for light load applications. Standard size provides smooth motion when paired with OpenBuilds Linear Rail. V Shaped profile designed specifically to ride in the track of V-Slot Linear Rail, C-Beam Linear Rail and OpenRail.

Solid V Wheel Kit

05.00.10

$1.93 $1.50

Complete kit includes all assembly hardware. Precise smooth motion for light to medium duty applications ie: 3D Printer. Flat surface with a V shaped outer edge allows the wheel to center ride in the track of V-Slot Linear Rail and C-Beam Linear Rail . Flat profile designed to work effortlessly with a belt on a belt and pinion system as well as lead screw and belt driven systems.

1m GT2 Rubber Timing Belt Width 6mm

12.09.02

$2.00 $1.40

There is no limit to the types of linear motion you can create by making an actuator based on one of these GT2 Timing Belts. They are popular for fast and lightweight movement.

GT2 20 Tooth 5mm Bore Timing Belt Pulley

04.00.03

$2.25 $1.30

IT GIVES BETTER SMOOTHNESS AND ACCURACY OF POSITIONING, RESULTING IN BETTER PRINTING QUALITY

L Bracket Double

05.00.103

$1.68

These L Brackets provide a lot of flexibility. They can be used to secure two components together at 90 degrees or as support for a spoiler board on a CNC Machine.

LM8UU 8mm 8x15x24mm Linear Ball Bearing Bush Bushing (Short)

05.00.73

$1.51 $1.00

Material Housing heat treated plated hard chrome steel. Cage Engineering plastics.Main dimensions ID 8mm,OD 15mm,Length 17-24mm.

V-Slot 20x40 Linear Rail

$2.51 $2.00

High-quality aluminium linear rail profile with an extremely smooth v groove on all 4 sides. It's precise, easy to work with and allows you unlimited design control through its modular nature. V-Slot Linear Rail is the ultimate solution combining both linear motion and a modular, structural framing system. It's lightweight yet rigid and provides an ultra smooth track for precise motion. In 2013, OpenBuilds created V-Slot Linear Rail and has added a library of compatible modular Parts which today is known as the OpenBuilds System. Over 1,000,000 feet of V-Slot has been shipped to businesses, classrooms, laboratories and makers all over the world! Much like working with lumber, you can cut V-Slot on a chop saw (using a metal blade) or even use a hacksaw. From there, you simply use a screw driver to make the connections.

Nylock Nut 3mm Stainless Steel

02.00.32

$0.07

MADE FROM HIGH QUALITY 304 STAINLESS STEEL KNOWN FOR ITS DEPENDABLE AND RIGID STRENGTH AS WELL AS ITS CORROSION RESISTANT QUALITY.

Lock Collar

04.00.212

$0.91 $0.70

A metal or plastic component that fits onto a shaft and prevents axial movement.

4PIN To 6PIN 1m Long Cable For Nema 17 Motor

05.00.38

$1.43 $0.60

Brand : Other Type : Cables Compatible with : Electronic Accessories

Stepper Motor Driver A4988 Module

03.00.07

$2.55

LOW RDS ON TOTAL RESISTANCE BETWEEN THE DRAIN AND SOURCE OUTPUTAUTOMATIC CURRENT DECAY MODE DETECTION AND SELECTIONSYNCHRONOUS RECTIFICATION FOLLOW POWER DISSIPATIONINTERNAL UNDER VOLTAGE LOCKOUT UVLOCROSS CURRENT PROTECTION3.3 AND 5V COMPATIBLE LOGICSUPPLYTHERMAL SHUT DOWN CIRCUITRYGROUND FAULT PROTECTION LOAD SHORT CIRCUIT PROTECTIONOPTIONAL STEP FIVE MODES.

Arduino UNO R3 Development Board

03.00.62

$15.12 $12.00

Microcontroller: ATmega328 Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins: 14 (of which 6 provide PWM output) Analog Input Pins: 6 DC Current per I/O Pin: 40 mA DC Current for 3.3V Pin:50 mA Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM: 2 KB (ATmega328) EEPROM: 1 KB (ATmega328) Clock Speed: 16 MHz

Rigid coupler 5mm to 8mm stepper motor Shaft coupling ( Blue )

04.00.223

$2.25

Flexible coupler 5mm to 8mm stepper motor Shaft coupling Specifications Material aluminium alloy Length 25 mm Outer diameter 14 mm

1m GT2 Rubber Timing Belt Width 6mm ( German )

12.11.02

$2.38

LENGTH : CUT PER METER ON DEMAND WIDTH : 6MM BELTS ARE SUPPLIED AS ONE LENGTH WHICH IS EASILY CUT TO THE REQUIRED LENGTH, ENOUGH FOR MOST VARIANTS OF 3D PRINTER DESIGNS. GOOD ANTI-CRACKING PERFORMANCE, AND SMALL EXTENDING RATE LONG SERVICE LIFE, BEARING WEAR AND TEAR, RESISTANT TO OIL, HEAT

3D Printer j-head Remote feed connector fittings 1.75mm/6mm (Stainless Steel)

04.00.24

$0.86 $0.50

3D Printer j-head Remote feed connector fittings 1.75mm/6mm (Stainless Steel)

Stepper Motor Flexible Coupling 5x8mm

05.00.69

$2.25

These Flexible couplings are used to transmit torque from a stepper motor to a lead screw, thus creating the movement in an actuator.

L Bracket single

05.00.132

$1.43

An L Bracket is a metal piece that connects two materials at a right angle.

GT2 20 Teeth synchronous Idler Pulley Bore 5mm

04.00.10

$2.25

GT 20 Synchronous Tooth Hysteresis Wheel Pulley Bore 5mm With GT2 Bearing Timing Belt Width 10mm Specifications: Type: AF Type with Bearing Timing Pulley Model Number: 2GTPitch: 2mm Tooth Number: 20 Width: 10mm Bore: 5mm Material

Double T-Nut - M5

10.00.149

$0.26 $0.20

Slide in Double Tee Nuts are a fundamental part of every build adding more flexibility to our system modularity.

Eccentric Spacer 6mm

04.00.49

$0.69 $0.50

These Eccentric Spacers are the perfect solution for creating a pre-load from the V-Wheels to the V-Slot Linear Rail. Pro-Tip: Eccentric Spacers comes with a divot on the outside which allows you to know at all times where the smallest part of the CAM hole is located.

SW2 ON/OFF (Up to 8A 250V AC) 2Pin

04.00.81

$0.43 $0.20

Brand : Other Type : Electronic Accessories

Inside Hidden Corner Bracket

05.00.98

$0.56

These Inside Hidden Corner Connectors provide a hidden inside 90-degree corner connection for V-Slot Linear Rail."Connection is quick and easy with the included set screws!"Qty. 1Dimensions: 25mm x 10mm(2) M5 Set Screws IncludedCompatible with 20mm V-Slot Linear RailCast ZincColor: Silver

SMPS Power Supply 12V/30A

08.05.02

$12.53 $11.00

Power supply switching type SMPS 12v regulated & adjustable 15% more or less voltage, up to 30A max current Not to be used as car battery charger / inverter for Surveillance cameras, alarms, engineering projects You can get different sources with 3 pin out voltage regulators.

Rigid coupler 5mm to 5mm stepper motor Shaft coupling for 3d printer

04.00.208

$1.43

Rigid coupler 5mm to 5mm stepper motor Shaft coupling for 3d printer Specifications Material aluminium alloy Length 25 mm Outer diameter 14 mm

Stepper Motor Nema 17 Used 38mm

08.03.06

$3.37

Nema 17 Used Motor Tested And Good Quality Length: 38mm Type: Nema 17 Work For CNC Machine and 3D Printer

LM10UU 10mm 10x19x29 Linear Ball Bearing Bush Bushing

05.00.43

$3.02 $2.00

Linear bearings are used for linear motion. They can be used to build low cost and simple linear guiding systems for a wide variety of applications such as CNC and 3d printers. This linear ball bearing slides along an 10mm linear shaft.

Gt2 6mm Closed Loop Timing Belt 2Gt-6 616mm Rubber Synchronous Belt

05.00.147

$2.59 $2.00

A rubber belt that has a circular shape and a 2mm pitch for connecting pulleys in 3D printers or other devices.

Threaded Rod Plate For Nema 23 Stepper Motor (Acrylic)

06.09.04

$0.86 $0.60

Pair this Threaded Rod Plate for NEMA 23 stepper motor series with a V-Slot rail and a matching length Lead Screw for a strong linear actuator ready to be used.

Ball Bearing 688Z 8x16x5

05.00.23

$0.87 $0.70

These bearings fit perfectly when coupled with our recessed plates and are designed to work with other applications such as the 8mm Acme Lead Screw.

V-Slot 20x20 Linear Rail

$1.68 $1.33

High-quality aluminum linear rail profile with an extremely smooth v groove on all 4 sides. It's precise, easy to work with and allows you unlimited design control through its modular nature.

Nema 17 Stepper Motor 17HS4401 38mm With Cable

08.14.03

$14.26 $11.00

Nema17 Stepper Motor 17HS4401S – 38mm Low noise. Low heat. Smooth operation. Good acceleration performance. Black surface treatment.

Stepper Motor Nema 23 Used 50mm

08.21.06

$5.62 $4.00

Nema 23 Used Motor Tested And Good Quality Length: 50mm Type: Nema 23 Work For CNC Machine and 3D Printer

3D Printer j-head Remote feed connector fittings 1.75mm/10mm (Stainless steel)

04.00.21

$0.86 $0.50

Size: 10mm Material: Stainless Steel Filament Type: 1.75 Teflon Tube Size: 2 x 4

Light Metal Nut Washer 5mm - Pack 50

10.00.112

$0.48 $0.33

Pack Quantity : 50 Type : Washers Material : Iron Brand : Othe

F608zz bearing 8x22x7

05.00.17

$1.53 $1.20

F608zz Metric Size Miniature Flanged Ball Bearings have deep groove geometry for high speeds and supporting both radial and axial loads. These F608zz Metric Size Miniature Flanged Ball Bearings are for use in applications that involve combined radial and axial loads and a need for high running accuracy at high rotational speeds.

GT2 20 Tooth 6.35 mm Bore Timing Belt Pulley

04.00.05

$2.38 $1.50

IT GIVES BETTER SMOOTHNESS AND ACCURACY OF POSITIONING, RESULTING IN BETTER PRINTING QUALITY

Flexible Coupling 8x6.35mm

05.00.70

$2.81

STEPPER MOTOR FLEXIBLE COUPLING 8 X 6.35 MM

Limit Switch (Roller Lever)

04.00.74

$0.86 $0.60

LIMIT SWITCHES SERVE AS THE MECHANISM THAT TELLS THE COMPUTER THE LIMITS OF THE 3D PRINTERS & CNC MACHINE. WHEN ONE OF THE AXES MOVES TO AN AXIS LIMIT, THE SWITCH IS ACTIVATED AND THE MACHINE STOPS.

Tee Nuts - M3 (10 pack)

02.00.14

$0.82

M3 TEE NUTS AVAILABLE. SOLD IN PACKS OF 10 FOR YOUR CONVENIENCE. "THESE M3 TEE NUTS ARE GREAT FOR WHEN YOUR PROJECT REQUIRES M3 SCREWS." QTY. 10 M3 USE FOR 10MM SIZE SLOT (V-SLOT LINEAR RAILS) NICKEL PLATED STEEL COLOR: SILVER

Stepper Motor Flexible Coupling 5x5mm

05.00.67

$2.25

These Flexible couplings are used to transmit torque from a stepper motor to a lead screw, thus creating the movement in an actuator.

AC Power Connector With On/Off Switch And Fuse Holder

06.01.01

$1.90 $1.60

A versatile and secure module that connects your devices to AC power with a switch and a fuse holder.

Mechanical Limit Switch with Wheels / Endstop for 3D Printers With 70 CM Cable

03.00.102

$2.59 $2.00

THIS MECHANICAL LIMIT SWITCH / ENDSTOP TELLS YOUR 3D PRINTER WHEN IT HAS REACHED THE END OF A RAIL.

GT2 40 Tooth 5mm Bore Timing Belt Pulley

04.00.15

$3.67 $2.00

IT GIVES BETTER SMOOTHNESS AND ACCURACY OF POSITIONING, RESULTING IN BETTER PRINTING QUALITY

Anti-Backlash Nut Block for 8mm Metric Acme Lead Screw

04.00.213

$3.46 $3.00

This Anti-Backlash Nut Block for 8mm Lead Screw is a great choice for many build projects requiring lead screw linear motion where high precision and repeatability with zero play or slop is needed.

T8 Anti Backlash Spring Loaded Nut For 8mm Acme Threaded Rod Lead Screws

02.00.17

$3.67 $2.50

A brass nut with a spring mechanism that reduces the gap and play between the nut and the screw. It fits 8mm acme threaded rod lead screws with a pitch of 2mm and a lead of 8mm. Ideal for CNC and 3D printer applications.

Servo Motor - SG90

05.00.137

$3.93 $2.50

Servo Motor - SG90 - This is a micro servo motor that can provide high output power in a compact size. It can turn up to 180 degrees with accuracy and speed. It is ideal for various applications that involve angular movement, such as robotics, drones, and toys. It includes a set of accessories to install and wire the motor conveniently.

Limit Switch (MS.2 - 19.5 x 10.0 x 6.0 mm)

04.00.72

$0.56 $0.20

Brand : Other Type : Electronic Accessories

XL4015 5A DC-DC Step Down Adjustable Power Supply Module Buck

03.00.59

$4.49 $2.60

XL4015 5A DC-DC Step Down Adjustable Power Supply Module BuckOutput voltage range：1.25-36VDC adjustableOutput current: 0-5AOutput power: 75WHigh efficiency up to 96%Built in thermal shutdown functionBuilt in current limit functionBuilt in output short protection functionInput reverse polarity protection: None (if required, high current diode in series with the input).10、L x W x H