A 608 RS bearing is a kind of deep groove ball bearing, which is one of the most common types of rolling bearings. It consists of an inner ring, an outer ring, a cage, and a set of balls that are held in place by the cage. The balls enable the bearing to rotate smoothly and reduce friction between the rotating parts. A 608 RS bearing has two rubber seals (RS) on both sides of the bearing, which prevent contaminants, such as dust and water, from entering the bearing and also retain the lubricant inside. The rubber seals also have a steel reinforcement to increase their durability. The size of a 608 RS bearing is measured by its inner diameter (d), outer diameter (D), and width (B). A 608 RS bearing has an inner diameter of 8 mm, an outer diameter of 22 mm, and a width of 7 mm. These dimensions are standardized according to the International Organization for Standardization (ISO) and are expressed as 8x22x7 mm or 22x8x7 mm. A 608 RS bearing can support both radial loads (perpendicular to the axis of rotation) and axial loads (parallel to the axis of rotation), but it is mainly designed for radial loads. The maximum speed that a 608 RS bearing can rotate depends on the type and amount of lubricant used, but it is generally around 34,000 revolutions per minute (RPM) with grease and 20,000 RPM with oil. A 608 RS bearing is widely used in various applications that require low noise and high speed, such as skateboards, inline skates, scooters, electric motors, bicycles, motorcycles, power tools, .
JUTHOURTECH