
Create a private, optional self-check-in with user-defined questions and neutral feedback, without converting answers into a medical diagnosis.
Prototype objective
The project focuses on sensing, state logic, feedback, and a low-voltage bench prototype that can be tested safely. Define user requirements, success criteria, and failure cases before considering any real deployment.
Suggested components
An Arduino Uno R3, a 6x6x5mm push button, a 16x2 I2C LCD (address 0x27), an active buzzer, a breadboard, and jumper wires.
Wiring and implementation
The push button connects to pin 2, the buzzer to pin 3, and the LCD uses I2C wiring at address 0x27.
Use a regulated supply and common ground, never drive loads directly from controller pins, and add current limiting, suitable interface stages, flyback protection for inductive loads, and logic-level conditioning as required.
Test plan
Make questions editable, provide skip and erase controls, test privacy and power loss, avoid judgmental scoring, and define what happens when the user requests help.
Use limitations
This device does not assess health, detect emergencies, or replace professional care. Do not store sensitive answers without informed consent and appropriate data protection.
Next step
Document the schematic, library versions, calibration, measurements, and failure cases. Whenever the application involves safety, health, children, buildings, or equipment, use qualified specialists and applicable standards rather than relying on a hobby prototype.
Leave your comment