Bench-Testing a Pharmacy Storage Temperature Logger

Bench-Testing a Pharmacy Storage Temperature Logger

Demonstrate calibrated temperature logging, excursion timing, local alarms, audit-friendly records, and sensor-failure handling on an empty storage model.

This is not a validated pharmaceutical monitoring system. Regulated storage requires qualified equipment, mapping, calibration records, access control, backup, audit trails, and approved procedures.

Prototype objective

The project focuses on sensing, state logic, feedback, and a low-voltage bench prototype that can be tested safely. Define user requirements, success criteria, and failure cases before considering any real deployment.

Suggested components

An Arduino-compatible demonstration logger, two calibrated-style temperature probes, a clock and nonvolatile logging module, local alarm, isolated supply, breadboard, and jumper wires.

Wiring and implementation

Connect the probes through documented interfaces, keep a shared UTC clock for records, write samples to nonvolatile storage, and supervise sensor disconnection, logging failure, and local alarm output.

Use a regulated supply and common ground, never drive loads directly from controller pins, and add current limiting, suitable interface stages, flyback protection for inductive loads, and logic-level conditioning as required.

Test plan

Compare readings with a calibrated reference at several conditions, evaluate sensor placement and stabilization, test threshold hysteresis, logging gaps, sensor faults, power loss, and notification failure.

Use limitations

This is not a validated pharmaceutical monitoring system. Regulated storage requires qualified equipment, mapping, calibration records, access control, backup, audit trails, and approved procedures.

Next step

Document the schematic, library versions, calibration, measurements, and failure cases. Whenever the application involves safety, health, children, buildings, or equipment, use qualified specialists and applicable standards rather than relying on a hobby prototype.

Leave your comment

*
*
Only registered users can leave comments.