Eccentric Spacers are the perfect solution for creating a pre-load from the V-Wheels to the V-Slotâ„¢ rail. They are added to one side of a set of wheels on a gantry plate. The eccentrics give an aprox 0.79mm adjustment range allow for a very strong and secure connection between the V rail and the wheel.
THESE SPACERS CAN BE USED IN ALL SORTS OF BUILDS. FOR EXAMPLE, WE USE THE SPACERS TO CREATE A SPACE BETWEEN THE STEPPER MOTOR AND MOTOR MOUNTING PLATE. THIS ALLOWS FOR ROOM TO MOUNT HARDWARE SUCH AS COUPLERS AND BELT PULLEYS TO THE MOTOR SHAFT.
THESE SPACERS CAN BE USED IN ALL SORTS OF BUILDS. FOR EXAMPLE, WE USE THE SPACERS TO CREATE A SPACE BETWEEN THE STEPPER MOTOR AND MOTOR MOUNTING PLATE. THIS ALLOWS FOR ROOM TO MOUNT HARDWARE SUCH AS COUPLERS AND BELT PULLEYS TO THE MOTOR SHAFT.
THESE SPACERS CAN BE USED IN ALL SORTS OF BUILDS. FOR EXAMPLE, WE USE THE SPACERS TO CREATE A SPACE BETWEEN THE STEPPER MOTOR AND MOTOR MOUNTING PLATE. THIS ALLOWS FOR ROOM TO MOUNT HARDWARE SUCH AS COUPLERS AND BELT PULLEYS TO THE MOTOR SHAFT.
Aluminium spacer 5.1 x 10 x 1/4 Inch They are great at making sturdy standoffs/spacings for your projects.The spacer has M5 ID to give a thicker wall to keep the screw snug and centered.These spacers can be used in all sorts of builds. For example, We use the spacers to create a space between the stepper motor and motor mounting plate. This allows for room to mount hardware such as couplers ...
THESE SPACERS CAN BE USED IN ALL SORTS OF BUILDS. FOR EXAMPLE, WE USE THE SPACERS TO CREATE A SPACE BETWEEN THE STEPPER MOTOR AND MOTOR MOUNTING PLATE. THIS ALLOWS FOR ROOM TO MOUNT HARDWARE SUCH AS COUPLERS AND BELT PULLEYS TO THE MOTOR SHAFT.
THESE SPACERS CAN BE USED IN ALL SORTS OF BUILDS. FOR EXAMPLE, WE USE THE SPACERS TO CREATE A SPACE BETWEEN THE STEPPER MOTOR AND MOTOR MOUNTING PLATE. THIS ALLOWS FOR ROOM TO MOUNT HARDWARE SUCH AS COUPLERS AND BELT PULLEYS TO THE MOTOR SHAFT.
THESE SPACERS CAN BE USED IN ALL SORTS OF BUILDS. FOR EXAMPLE, WE USE THE SPACERS TO CREATE A SPACE BETWEEN THE STEPPER MOTOR AND MOTOR MOUNTING PLATE. THIS ALLOWS FOR ROOM TO MOUNT HARDWARE SUCH AS COUPLERS AND BELT PULLEYS TO THE MOTOR SHAFT.
These eccentric spacers, available in lengths of 1/4, are used with V wheels and Open Builds V-Slot (TM) aluminum extrusions to create simple, affordable linear motion systems. The spacer has an off-center 5mm bore, which allows you to tighten the wheel against the extrusion. The spacer sits in a 7.12mm hole and allows for an adjustment of up to 0.79mm. There is a divot on the spacer that indicates where the offset bore is closest to the edge.
The spacer sits in a 7.12mm hole and allows for an adjustment of up to 0.79mm. There is a divot on the spacer that indicates where the offset bore is closest to the edge.
These eccentric spacers, available in lengths of 1/4 inch. are used with Openbuilds V-Slot aluminum extrusions to create simple, affordable linear motion systems. The spacer has an off-center 5mm bore, which allows you to tighten the wheel against the extrusion.