*Completely solve the hot bed power is too large and the load current issue
*Under the premise of normal cooling, it work stable under I(Max)=10A,
the current must not exceed 10A while the process working
*If you need anything greater or equal to 10A this module is a must! For example,
if your total power usage is 120W and you have 12V power supply, then it means at least 10A is needed (10X12=120W).
*As ChiTu controller board is only capable of 10A this setting will not work. To make it work,you need this extra power module.
*If the power is used improperly, it may burn.