You have no items in your shopping cart.

OpenBuilds Parts

OpenBuilds is dedicated to the advancement of open source hardware and design.  We are the original creators of V-Slot Linear Rail and have added a library of compatible modular parts which today is known as the OpenBuilds Modular Building System.  We have shipped over one million feet of V-Slot to businesses, classrooms, laboratories and makers all over the world!

J3030 PCB Machine Full Kit

$546.00 $491.40

PCB milling has advantages for both prototyping and some special PCB designs. Probably the biggest benefit is that one doesn't have to use chemicals to produce PCBs. When creating a prototype, outsourcing a board takes time. Alternative is to make a PCB in-house. Using the wet process, in-house production presents problems with chemicals and disposing thereof. High-resolution boards using the wet process are hard to achieve and still, when done, one still has to drill and eventually cut out the PCB from the base material. CNC machine prototyping can provide a fast-turnaround board production process without the need for wet processing. If a CNC machine is already used for drilling, this single machine could carry out both parts of the process, drilling and milling. A CNC machine is used to process drilling, milling and cutting.

J3018 Pro PCB & CNC Machine

$273.00 $245.70

PCB milling has advantages for both prototyping and some special PCB designs. Probably the biggest benefit is that one doesn't have to use chemicals to produce PCBs. When creating a prototype, outsourcing a board takes time. Alternative is to make a PCB in-house. Using the wet process, in-house production presents problems with chemicals and disposing thereof. High-resolution boards using the wet process are hard to achieve and still, when done, one still has to drill and eventually cut out the PCB from the base material. CNC machine prototyping can provide a fast-turnaround board production process without the need for wet processing. If a CNC machine is already used for drilling, this single machine could carry out both parts of the process, drilling and milling. A CNC machine is used to process drilling, milling and cutting.

LEAD CNC Machine 1515 ( 145 cm x 145 cm )

$1,200.00 $1,080.00

The LEAD 1515 is a large, fully capable, rigid machine ready for you to put into production. It's powerful and has high-resolution output to get the job done time and time again.

C-Beam Linear Actuator Bundle

$67.08 $60.37

Strength, accuracy, and power coupled with its longer length options makes this actuator the perfect choice for your larger projects and machines. It has a wide stance, rigid gantry cart and includes high resolution screw driven power. The included gantry cart is capable of being mounted 90 degrees to each other creating either an X/Y system or even an X/Z system for a CNC machine. This powerful and extremely accurate actuator has the capability to get your projects moving on a larger scale than ever before.

V-Slot 20x40 Linear Actuator Bundle

$39.00 $35.10

*The V-Slot® 20x40 Linear Actuator (Belt Driven) is a great component in any linear system. *It’s fast and modular which means it can easily be built into any linear application. *Take advantage of this amazingly affordable linear motion system today!

V-Slot 20x60 Linear Actuator Bundle (Lead Screw)

$53.04 $47.74

The V-Slot Linear Actuator is a great component in any linear system. It’s precise and modular which means it can easily be built into any linear application. Take advantage of this amazingly affordable linear motion system today! Specifications: Lead Screw Driven Accuracy: 0.001" ~0.003" (0.05mm ~0.10mm) Accuracy Positioning: 0.075mm

End Mill 2 Flutes 6x22.5mm

11.00.07
$8.22 $7.40

Brand: Other Type: Drill Bits Is It a Set: No

End Mill 2 Flutes 6x30mm

11.01.07
$10.56 $9.50

Brand Name: STECHTOL Material: Carbide Type: Vertical Mill Model Number: ST6-AAL3LX30Overall Length: 3.937 '' / 100mm Diameter: 0.236 '' / 6mm Coverage: Not Coated

End Mill 2 Flutes 8mm

11.00.08
$9.36 $8.42

Brand: Other Type: Drill Bit Sharpeners Is It a Set: No

End mill 4 Flutes 5mm

11.00.13
$8.22 $7.40

Brand: Other Type: Drill Mills Is It a Set: No

End Mill 4 Flutes 10mm

11.00.16
$10.14 $9.13

Brand: Other Type: Drill Bits Is It a Set: No

End Mill 4 Flutes 2mm

11.00.10
$7.02 $6.32

Brand : Other Type : Drill Bits Is It a Set : No

End mill 4 Flutes 3mm

11.00.11
$7.80 $7.02

Brand : Other Type : Drill Bits Is It a Set : No

End Mill 4 Flutes 4mm

11.00.12
$8.22 $7.40

Brand: Other Type: Drill Bits Is It a Set: No

End Mill 4 Flutes 6mm

11.00.14
$8.58 $7.72

Brand: Other Type: Drill Bits Is It a Set: No

End Mill 4 Flutes 8mm

11.00.15
$9.36 $8.42

Brand: Other Type: Drill Bits Is It a Set: No

End Mill For Pcb 2 Flutes D3 x 2mm x 39.8mm

11.01.149
$7.44 $6.70

Product Name : End Mill For Pcb Number of Flutes : 2 flutes Dimensions : D3x 2mm x 39.8

End Mill Half Straight Bit D:3.175 x 1 x 3mm

11.00.124
$3.54 $3.19

Weitol half straight bit Matrial is high quality tungsten carbide Applied in acrylic, PVC,two-color plate, organic plate Sharp and wear-resisting, smooth chip removal without sticking bit Not easy to break and long service life

Carbide End Mill Bit 1 flute 1.15 mm

11.01.02
$3.54 $3.19

Brand: Other Type: Drill Bits Is It a Set: No

Carbide End Mill Bit 4 Flute D:1 H:3 Shank:4

11.00.151
$18.72 $16.85

D:1mm H:3mm Shank:4

Carbide End Mill Bit 4 Flute D:1.5 H:3 Shank:4

11.01.151
$19.14 $17.23

D:1.5mm H:3mm Shank:4

Carbide End Mill Bit 4 Flutes D:2 H:3 Shank:4

11.00.152
$19.14 $17.23

D:4mm H:3mm Shank:4

Carbide End Mill Bit 4 Flutes D:4 H:11 Shank:4

11.00.154
$20.28 $18.25

D:4mm H:1mm Shank:4

Carbide End Mill Bit 4 Flutes D:6 H:16 Shank:6

11.00.155
$21.06 $18.95

D:6mm H:16mm Shank:6

Carbide End Mill Bit 4 Flutes D:8 H:25 Shank:8

11.00.156
$21.84 $19.66

D:8mm H:25mm Shank:8

End mill 1 flute 1.5mmx5mm for aluminum Shank :3.175

11.01.137
$5.46 $4.91

Optimized for Aluminum, composite structures such as High-density polyethylene (HDPE) or polyethylene high-density (PEHD). Suitable for all-round slotting, peripheral, ramping, plunging, helical interpolation or high-speed machining Corner style with square ends, suitable for ramping on blank surface, slotting and radial cutting. Significant reduced part-costs due to higher surface quality, stability and process security.

End mill 1 flute 2mmx6mm for aluminum Shank :3.175

11.00.132
$5.46 $4.91

Optimized for Aluminum, composite structures such as High-density polyethylene (HDPE) or polyethylene high-density (PEHD). Suitable for all-round slotting, peripheral, ramping, plunging, helical interpolation or high-speed machining Corner style with square ends, suitable for ramping on blank surface, slotting and radial cutting. Significant reduced part-costs due to higher surface quality, stability and process security.

End mill 1 flute 2mmx8mm for aluminum Shank :3.175

11.01.132
$5.46 $4.91

Optimized for Aluminum, composite structures such as High-density polyethylene (HDPE) or polyethylene high-density (PEHD). Suitable for all-round slotting, peripheral, ramping, plunging, helical interpolation or high-speed machining Corner style with square ends, suitable for ramping on blank surface, slotting and radial cutting. Significant reduced part-costs due to higher surface quality, stability and process security.

End mill 1 flute 3mmx17mm for aluminum Shank :3

11.01.134
$5.46 $4.91

Optimized for Aluminum, composite structures such as High-density polyethylene (HDPE) or polyethylene high-density (PEHD). Suitable for all-round slotting, peripheral, ramping, plunging, helical interpolation or high-speed machining Corner style with square ends, suitable for ramping on blank surface, slotting and radial cutting. Significant reduced part-costs due to higher surface quality, stability and process security.

End mill 1 flute 4mmx15mm for aluminum Shank : 4

11.01.138
$10.14 $9.13

Optimized for Aluminum, composite structures such as High-density polyethylene (HDPE) or polyethylene high-density (PEHD). Suitable for all-round slotting, peripheral, ramping, plunging, helical interpolation or high-speed machining Corner style with square ends, suitable for ramping on blank surface, slotting and radial cutting. Significant reduced part-costs due to higher surface quality, stability and process security.

End mill 1 flute 4mmx17mm for aluminum Shank : 4

11.03.138
$9.36 $8.42

Optimized for Aluminum, composite structures such as High-density polyethylene (HDPE) or polyethylene high-density (PEHD). Suitable for all-round slotting, peripheral, ramping, plunging, helical interpolation or high-speed machining Corner style with square ends, suitable for ramping on blank surface, slotting and radial cutting. Significant reduced part-costs due to higher surface quality, stability and process security.

End mill 1 flute 6mmx17mm for aluminum Shank :6

11.00.139
$15.60 $14.04

Optimized for Aluminum, composite structures such as High-density polyethylene (HDPE) or polyethylene high-density (PEHD). Suitable for all-round slotting, peripheral, ramping, plunging, helical interpolation or high-speed machining Corner style with square ends, suitable for ramping on blank surface, slotting and radial cutting. Significant reduced part-costs due to higher surface quality, stability and process security.

End mill 1 flute 6mmx32mm for aluminum Shank:6

11.02.139
$19.50 $17.55

Optimized for Aluminum, composite structures such as High-density polyethylene (HDPE) or polyethylene high-density (PEHD). Suitable for all-round slotting, peripheral, ramping, plunging, helical interpolation or high-speed machining Corner style with square ends, suitable for ramping on blank surface, slotting and radial cutting. Significant reduced part-costs due to higher surface quality, stability and process security.

End Mill 2 Flutes 0.25 mm

11.01.01
$1.98 $1.78

Brand: Other Type: Drill Bits Is It a Set: No

End Mill 2 Flutes 0.3 mm

11.02.01
$1.98 $1.78

Brand: Other Type: Drill Bits Is It a Set: No

End Mill 2 Flutes 10mm

11.00.09
$7.02 $6.32

Brand : Other Type : Drill Bits Is It a Set : No

end mill 2 flutes 2mm

11.00.03
$5.88 $5.29

Brand: Other Type: Drill Mills Is It a Set: No

End Mill 2 Flutes 3mm

11.00.04
$5.88 $5.29

Brand: Other Type: Drill Mills Is It a Set: No

End Mill 2 Flutes 4mm

11.00.05
$8.22 $7.40

Brand : Other Type : Drill Mills Is It a Set : No

End mill 2 flutes 5mm - Drill Mills

11.00.06
$8.58 $7.72

Brand: Other Type: Drill Mills Is It a Set: No

End Mill 2 Flutes 6x20mm

11.02.07
$9.36 $8.42

Shank diameter: 6mm Cutting edge diameter: 6mm Cutting Length:20mm Total length: 50mm Material: Tungsten steel

Router Drill Bit D: 8mm H: 30mm Shank: 8

13.15.01
$1.98 $1.78

Brand : Other Type : 3D Printer Accessories

Router Drill Bit D: 31mm H: 5mm Shank: 8

13.05.03
$2.76 $2.48

Brand : Other Type : 3D Printer Accessories

Router Drill Bit D: 31mm H: 10mm Shank: 12

13.09.03
$2.76 $2.48

Brand : Other Type : 3D Printer Accessories

Router Drill Bit D: 10mm H: 10mm Shank: 8

13.03.02
$1.98 $1.78

Type: Router Drill Bit D: 10mm H: 10mm Shank: 8

Router Drill Bit D: 12mm H: 12mm Shank: 8

13.04.02
$1.98 $1.78

D:12mm H:12mm Shank:8

Router Drill Bit D: 16mm H: 16mm Shank: 6

13.06.02
$1.98 $1.78

Type: Router Drill Bit D: 16mm H: 16mm

Router Drill Bit D: 25mm H: 11mm Shank: 8

13.06.05
$2.34 $2.11

D:25mm H:11mm Shank:8

Router Drill Bit D: 35mm H: 16mm Shank: 12

13.01.04
$2.76 $2.48

Brand : Other Type : 3D Printer Accessories

Router Drill Bit D: 8mm H: 8mm Shank: 8

13.01.02
$2.76 $2.48

Brand : Other Type : 3D Printer Accessories