Linear Rail

Linear rails, also referred to as linear motion guides and linear slides, are common motion components used to achieve smooth sliding motions. They can be found in 3D printers, CNC mills, waterjet cutters, and the like. A linear rail consists of a stiff, steel rail, along which a carriage slide. 

View as Grid List
Sort by
Display per page

1 Meter Linear Rod (Stainless Steel) 10MM

stock
This linear motion shaft is 10 mm in diameter and 1000mm long, chrome plated, and case hardened, and is suitable for use with linear support blocks and closed type slide units in linear motion applications. The high-carbon steel shaft is chrome plated for corrosion resistance, case hardened for wear resistance, and precision ground for consistent ball bushing radial clearance. The shaft diameter and length are specified for accurate fit and this shaft is suitable for use in applications, such as measuring systems, printing equipment, and computer numerical control (CNC) tools. Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.
ج.م.‏ 70.00 ج.م.‏ 55.00

1 Meter Linear Rod (Stainless Steel) 10mm

stock
This linear motion shaft is 10 mm in diameter and 1000mm long, chrome plated, and case hardened, and is suitable for use with linear support blocks and closed type slide units in linear motion applications. The high-carbon steel shaft is chrome plated for corrosion resistance, case hardened for wear resistance, and precision ground for consistent ball bushing radial clearance. The shaft diameter and length are specified for accurate fit and this shaft is suitable for use in applications, such as measuring systems, printing equipment, and computer numerical control (CNC) tools. Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.
ج.م.‏ 80.00 ج.م.‏ 70.00

1 Meter Linear Rod (Stainless Steel) 12mm

stock
This linear motion shaft is 12 mm in diameter and 1000mm long, chrome plated, and case hardened, and is suitable for use with linear support blocks and closed type slide units in linear motion applications. The high-carbon steel shaft is chrome plated for corrosion resistance, case hardened for wear resistance, and precision ground for consistent ball bushing radial clearance. The shaft diameter and length are specified for accurate fit and this shaft is suitable for use in applications, such as measuring systems, printing equipment, and computer numerical control (CNC) tools. Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.
ج.م.‏ 100.00 ج.م.‏ 90.00

1 Meter Linear Rod (Stainless Steel) 5MM

stock
This linear motion shaft is 5mm in diameter and 1000mm long, chrome plated, and case hardened, and is suitable for use with linear support blocks and closed type slide units in linear motion applications. The high-carbon steel shaft is chrome plated for corrosion resistance, case hardened for wear resistance, and precision ground for consistent ball bushing radial clearance. The shaft diameter and length are specified for accurate fit and this shaft is suitable for use in applications, such as measuring systems, printing equipment, and computer numerical control (CNC) tools. Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.
ج.م.‏ 25.00 ج.م.‏ 20.00

1 Meter Linear Rod (Stainless Steel) 8mm

stock
This linear motion shaft is 8 mm in diameter and 1000mm long, chrome plated, and case hardened, and is suitable for use with linear support blocks and closed type slide units in linear motion applications. The high-carbon steel shaft is chrome plated for corrosion resistance, case hardened for wear resistance, and precision ground for consistent ball bushing radial clearance. The shaft diameter and length are specified for accurate fit and this shaft is suitable for use in applications, such as measuring systems, printing equipment, and computer numerical control (CNC) tools. Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.
ج.م.‏ 40.00 ج.م.‏ 30.00

1 Meter Linear Rod (Stainless Steel) 8MM

stock
This linear motion shaft is 8 mm in diameter and 1000mm long, chrome plated, and case hardened, and is suitable for use with linear support blocks and closed type slide units in linear motion applications. The high-carbon steel shaft is chrome plated for corrosion resistance, case hardened for wear resistance, and precision ground for consistent ball bushing radial clearance. The shaft diameter and length are specified for accurate fit and this shaft is suitable for use in applications, such as measuring systems, printing equipment, and computer numerical control (CNC) tools. Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.
ج.م.‏ 50.00 ج.م.‏ 40.00

Drillpro 1.22M Aluminum Alloy T-Track Woodworking T-slot Miter Track

09.00.07
pecification‎:‎ Material‎:‎ Aluminum Alloy Length‎:‎ 1220mm Size‎:‎ 45x12.8mm Miter Track Stop Fit for Miter Track with Scale Features‎:‎ 1‎.‎ Suitable for woodworking‎.‎ 2‎.‎ Durable and convenient to use‎.‎ 3‎.‎ It will allow you to make all your sliding jig and fixture needs on the router table‎,‎ tablesaws and bandsaws‎.‎ 4‎.‎ You can clamp your featherboards to your router table or tablesaws easily and quickly without special clamping fixtures‎.‎ 5‎.‎ With Scale‎,‎ easy to use‎,‎ make your work easier‎.‎ Package Included‎:‎ 1 x T Track or Miter Track
ج.م.‏ 1,300.00

Drillpro 1000mm Aluminum Alloy T-Track Woodworking T-slot Miter Track

09.00.06
Specification‎:‎ Material‎:‎ Aluminum Alloy Length‎:‎ 1000mm Size‎:‎ 45x12.8mm Miter Track Stop Fit for Miter Track with Scale Features‎:‎ 1‎.‎ Suitable for woodworking‎.‎ 2‎.‎ Durable and convenient to use‎.‎ 3‎.‎ It will allow you to make all your sliding jig and fixture needs on the router table‎,‎ tablesaws and bandsaws‎.‎ 4‎.‎ You can clamp your featherboards to your router table or tablesaws easily and quickly without special clamping fixtures‎.‎ 5‎.‎ With Scale‎,‎ easy to use‎,‎ make your work easier‎.‎ Package Included‎:‎ 1 x T Track or Miter Track
ج.م.‏ 1,120.00

Drillpro 600mm Aluminum Alloy T-Track Woodworking T-slot Miter Track

09.00.04
Specification‎:‎ Material‎:‎ Aluminum Alloy Length‎:‎ 600mm Size‎:‎ 45x12.8mm Miter Track Stop Fit for Miter Track with Scale Features‎:‎ 1‎.‎ Suitable for woodworking‎.‎ 2‎.‎ Durable and convenient to use‎.‎ 3‎.‎ It will allow you to make all your sliding jig and fixture needs on the router table‎,‎ tablesaws and bandsaws‎.‎ 4‎.‎ You can clamp your featherboards to your router table or tablesaws easily and quickly without special clamping fixtures‎.‎ 5‎.‎ With Scale‎,‎ easy to use‎,‎ make your work easier‎.‎ Package Included‎:‎ 1 x T Track or Miter Track
ج.م.‏ 840.00

Drillpro 800mm Aluminum Alloy T-Track Woodworking T-slot Miter Track

09.00.05
Specification‎:‎ Material‎:‎ Aluminum Alloy Length‎:‎ 800mm Size‎:‎ 45x12.8mm Miter Track Stop Fit for Miter Track with Scale Features‎:‎ 1‎.‎ Suitable for woodworking‎.‎ 2‎.‎ Durable and convenient to use‎.‎ 3‎.‎ It will allow you to make all your sliding jig and fixture needs on the router table‎,‎ tablesaws and bandsaws‎.‎ 4‎.‎ You can clamp your featherboards to your router table or tablesaws easily and quickly without special clamping fixtures‎.‎ 5‎.‎ With Scale‎,‎ easy to use‎,‎ make your work easier‎.‎ Package Included‎:‎ 1 x T Track or Miter Track
ج.م.‏ 960.00

LM8UU 8mm 8x15x24mm Linear Ball Bearing Bush Bushing

05.00.73
Material Housing heat treated plated hard chrome steel. Cage Engineering plastics.Main dimensions ID 8mm,OD 15mm,Length 17-24mm.
ج.م.‏ 45.00 ج.م.‏ 25.00

V-Slot 20x20 Linear Rail

stock
High-quality aluminium linear rail profile with an extremely smooth v groove on all 4 sides. It's precise, easy to work with and allows you unlimited design control through its modular nature.
ج.م.‏ 110.00 ج.م.‏ 80.00

V-Slot 20x40 Linear Rail

stock
High-quality aluminium linear rail profile with an extremely smooth v groove on all 4 sides. It's precise, easy to work with and allows you unlimited design control through its modular nature. V-Slot Linear Rail is the ultimate solution combining both linear motion and a modular, structural framing system. It's lightweight yet rigid and provides an ultra smooth track for precise motion. In 2013, OpenBuilds created V-Slot Linear Rail and has added a library of compatible modular Parts which today is known as the OpenBuilds System. Over 1,000,000 feet of V-Slot has been shipped to businesses, classrooms, laboratories and makers all over the world! Much like working with lumber, you can cut V-Slot on a chop saw (using a metal blade) or even use a hacksaw. From there, you simply use a screw driver to make the connections.
ج.م.‏ 165.00 ج.م.‏ 150.00

V-Slot 20x60 Linear Rail

stock
High-quality aluminium linear rail profile with an extremely smooth v groove on all 4 sides. It's precise, easy to work with and allows you unlimited design control through its modular nature.
ج.م.‏ 260.00 ج.م.‏ 240.00