Heat beds are used because they dramatically improve print quality by keeping the extruded plastic warm and thus preventing warping. Warping is a common condition caused by plastic on the edges of the part cooling down at an uneven rate when compared to the plastic inside of the part. The result is that corners warp up and deform your model. Heat beds work to prevent this warping effect by keeping your part warm during the whole printing process which keeps the material at or above heat-deflection temperature (the temperature at which it is malleable). Keeping the parts in the heat-deflection range ensures that the part remains flat on the print bed.
3D HEATED TABLE PCB MKS MK3-220 OPTIMIZED HEAT BED MK2B ALUMINUM 220X220MM 110C EXCELLENT SMOOTH/STABILITY/DURABILITY/HARDNESS
RESISTANCE BETWEEN 1.4 AND 1.6 OHM FOR THE 12V
RESISTANCE BETWEEN 5.0 AND 5.4 OHM FOR THE 24V
100 DEGREE CELSIUS POSSIBLE FOR BOTH 12V AND 24V
MATERIAL : ALUMINUM PLATE
VOLTAGE : 12V/24V
MAX TEMPERATURE : 180 DEGREE CELSIUS
DIMENSIONS : 220MM X 220MM
THICKNESS : 3MM
NET WEIGHT : 413G
COLOR : BLACK
Silicone heating panels, flexible heating plate belongs, with insulation, waterproof, temperature and other properties, can be bent; can be used for tank heating insulation, power distribution box heat insulation, and cold regions of the auxiliary electrical equipment start preheating!
MK2B CAN SELECT TWO OPERATING VOLTAGE OF 12V AND 24V.
MK2B USES ALUMINUM PLATE.
MATERIAL ARE MORE PRACTICAL.
Dimensions 214 x 214 x 2mm
Power Input 12V and 24V.
Resistance under 12V voltage 1.2 ohms.
under 24V voltage, resistance 4.8 ohms.
Technology aluminum plate.
Copper plated holes.
Material: Special PC
Size: 200x200mm / 200x300mm / 220x220mm / 300x300mm
Color: Black / Red
Why do you need to choose a heatbed biqu sticker?
1.Beacuse 3D printing models easliy when printing Alice edge.
2. Once the Alice Rose models are printed, our efforts have to come to nothing.
- Adhesive heatbed is made of special raw PC chip, not only can prevent 3D printing models Alice edge but keep the surface smooth.
- The computer chip is co-extrusion molding, insulation, environmental protection, pollution-free heating
The computer chip uses coarse thread, with many small holes in the surface, it can effectively improve the cooling effect of 3D filament and curling edges in the printing process.