Electronics

View as Grid List
Sort by
Display per page

10 Piece DC Female to AV Screw Terminal Block Connector Kit for Power Adapter

05.00.118
Type: Adapters Compatible with: Surveillance Cameras Color: Black Number of Piece: 10 Details: Simple to use and install. Widely used for connection of Power Adapter, CCTV and other Power devices. Easy conversion from DC Female to Screw Terminal Block.
ج.م.‏ 150.00 ج.م.‏ 100.00

10 Pin Color Rainbow Ribbon Wire Cable Flat 1.27mm Pitch (1m)

12.08.02
10 PIN COLOR RAINBOW RIBBON WIRE CABLE FLAT 1.27MM PITCH AWG SIZE: 28AWG PITCH: 1.27 MM TOTAL LENGTH: 1M RATE TEMPERATURE : -20°C TO 105°C RATE VOLTAGE: MAX 300V
ج.م.‏ 15.00 ج.م.‏ 12.00

10 Pin Female Tall Header Connector Socket

04.00.78
This is a 10-pin female header, with extra long legs – great for stacking Arduino shields.
ج.م.‏ 10.00 ج.م.‏ 6.00

10 Position DIP Switch 2.54mm

04.00.70
CONTACT RESISTANCE : 50MΩ 24VDC/100MA (AT INITIAL);100MΠTYPICAL, 24VDC/100MA (AFTER LIFE TEST) : 100MΩ TYPICAL, 24VDC/100MA (AFTER LIFE TEST);EACH SIZE : 12 X 10 X 11 MM / 0.47" X 0.4" X 0.43" (L*W*H)
ج.م.‏ 15.00

100K ohm NTC 3950 Thermistors

05.00.28
100K ohm NTC 3950 Thermistors
ج.م.‏ 45.00 ج.م.‏ 35.00

105 Rotary Tool Set

06.03.09
THIS SET INCLUDES 105 pcs A Mixture of the following: Polishing tools & pads, Cutting discs & drums, Grinding bits & discs, Carving bits & Cleaning Bits Contents: silicon carbide 19.8mm grinding stone & polishing compound. silicon carbide oxide 10.3mm grinding stone, aluminium oxide 15.8mm grinding stone, aluminium oxide 9.5mm grinding stone, 9.5 x 25.4 mm dressing stone, 12.7mm bristle cup brush, 19mm wire wheel brush, 9.5mm felt polishing tip, 6 piece 12.7mm felt polishing wheel, 25.4mm felt polishing wheel, 3 piece reinforced 31.8mm cut off wheel, 2pc high speed 3.2mm cutter, 12.7mm sandingbands, 4 piece coarse grit 5 piece finegrit 12.7mm sanding bands, 11 piece 12.7mm drum sander, 36 piece medium grit 19mm sanding discs, 36 piece 23.8mm cut off wheels, Includes two 3.2mm mandrels,
ج.م.‏ 140.00 ج.م.‏ 120.00

12-volt electronic lock to control automatic door opening

05.00.123
Low Temperature, safe & Durable Low Power, Environmental Protection Special photo electricity control,three steps current application Provides Reverse Current Protection Superior Strength Alloy,Solid Stain- less Steel Bolt Door statue signal output contact Double protection for loading current Auto re lock if no Action within 5 secs. Certificate:CE&MA
ج.م.‏ 200.00 ج.م.‏ 170.00

1M 15A HeatBed High Power Output Cable For 3D Printer

05.00.53
Brand : Other Type : Cables Compatible with : Electronic Accessories
ج.م.‏ 40.00 ج.م.‏ 30.00

1x aa Battery Case Box Holder

06.08.08
This product is battery holder for 1x 18650 / 3.7V rechargeable batteries. Features: High-quality plastic holder Small size, easy to carry Takes 1 standard size 18650 batteries side by side to form a compact battery of 3.7Vx1 = 3.7V Embossed polarity marks
ج.م.‏ 8.00 ج.م.‏ 5.00

2 PIN - 2.8mm Connector Male & Female With Terminal

04.00.109
You can create & customize all required plugs in your next project ! 2 PIN 2.8mm Nylon connector include : Male plug Female plug
ج.م.‏ 8.00 ج.م.‏ 5.00

2 x AA Battery Holder + On/Off Switch

06.15.08
2 X AA BATTERY HOLDER + ON/OFF SWITCH MATERIAL: PLASTIC, METAL CABLE LENGTH : 11CM / 4.7 " COLOR: BLACK NET WEIGHT: 64 GM
ج.م.‏ 15.00 ج.م.‏ 10.00

2 x AAA Battery Holder + On/Off Switch

06.10.08
2 X AAA BATTERY HOLDER + ON/OFF SWITCH MATERIAL: PLASTIC, METAL CABLE LENGTH : 11CM / 4.7 " COLOR: BLACK
ج.م.‏ 9.00 ج.م.‏ 10.00

2.54mm Header Shooting Blocks Jumpers With Handle

04.00.129
Features • Suitable for Male Headers • With Handel • Current Rating up to 1A • 2.54 mm
ج.م.‏ 1.25 ج.م.‏ 1.00

20 Pin Color Rainbow Ribbon Wire Cable Flat 1.27mm Pitch (1m)

12.09.02
AWG SIZE: 28AWG PITCH: 1.27 MM TOTAL LENGTH: 1M RATE TEMPERATURE : -20°C TO 105°C RATE VOLTAGE: MAX 300V
ج.م.‏ 30.00 ج.م.‏ 25.00

3 mm LED Metal Cover

04.00.215
Do you want to fix your LED on your project box and don't know how? this 3mm LED Metal Cover – suitable for any project box. Please note that this cove come without any LED.
ج.م.‏ 4.00 ج.م.‏ 2.50

3 PIN - 2.8mm Connector Male & Female With Terminal

04.00.110
ج.م.‏ 9.00 ج.م.‏ 10.00

3x AA Battery Holder + On/Off Switch

06.09.08
3X AA BATTERY HOLDER + ON/OFF SWITCH MATERIAL: PLASTIC, METAL CABLE LENGTH : 11CM / 4.7 " COLOR: BLACK NET WEIGHT: 64 GM
ج.م.‏ 20.00 ج.م.‏ 15.00

34 Pin Color Rainbow Ribbon Wire Cable Flat 1.27mm Pitch (1m)

05.02.04
AWG SIZE: 28AWG PITCH: 1.27 MM TOTAL LENGTH: 1M RATE TEMPERATURE : -20°C TO 105°C RATE VOLTAGE: MAX 300V
ج.م.‏ 50.00 ج.م.‏ 40.00

3D Printer Cartridge Heater Reprap 24V 30W

05.00.36
Cartridge Heater Reprap 24V 30W 6x20mm Ceramic for 3D Printer Prusa Mendel 24v30wVoltage:24VPower: 30wCore: ceramicDiameter: 6mmLenght: 30mmLead Wire lenght: 100cmCartridge heaters is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention.The heating wire inside which is wound onto a ceramic core.The solids, liquids, and gases need to be heated by ...
ج.م.‏ 50.00 ج.م.‏ 40.00

3D Printer Cartridge Heater Reprap 24V 40W

05.00.37
CARTRIDGE HEATER REPRAP 24V 40W 6X20MM CERAMIC FOR 3D PRINTER PRUSA MENDEL 24V40W VOLTAGE:24V POWER: 40W CORE: CERAMIC DIAMETER: 6MM LENGHT: 30MM LEAD WIRE LENGHT: 100CM CARTRIDGE HEATERS IS CONSIST OF A CYLINDRICAL STAINLESS STEEL TUBE AND THUS PROVIDE A HIGH CORROSION PREVENTION. THE HEATING WIRE INSIDE WHICH IS WOUND ONTO A CERAMIC CORE. THE SOLIDS, LIQUIDS, AND GASES NEED TO BE HEATED BY CARTRIDGE HEATER, TRANSMIT HEAT QUICKLY BY CONDUCTION IF THE PRODUCER OF THE HEAT (THE CARTRIDGE) IS IN DIRECT CONTACT WITH THE HEAT SINK (ANY SOLID, LIQUID, OR GAS). WIDELY USED FOR MANUFACTURING PLASTIC AND RUBBER PARTS IN THE CAR INDUSTRY OR IN THE FOOD PROCESSING INDUSTRY, 3D PRINTERS, ETC Brand : Other Type : 3D Printer Accessories
ج.م.‏ 50.00 ج.م.‏ 40.00

3D PRINTER EXTRUDER FAN 3X3 12V

05.00.61
ج.م.‏ 50.00

3D PRINTER EXTRUDER FAN 4X4 12V

05.00.62
ج.م.‏ 40.00

3D Printer Extruder FAN 5x5 12V

05.00.63
Brand : Gostime Are batteries needed to power the product or is this product a battery : No Is this a Dangerous Good or a Hazardous Material, Substance or Waste that is regulated for transportation, storage, and/or disposal? : No Type : 3D Printer Accessories
ج.م.‏ 50.00 ج.م.‏ 40.00

3D PRINTER EXTRUDER FAN 5X5 5V

05.00.65
Brand : Yikeshu Are batteries needed to power the product or is this product a battery : No Is this a Dangerous Good or a Hazardous Material, Substance or Waste that is regulated for transportation, storage, and/or disposal? : No Type : 3D Printer AccessoriesBrand : Yikeshu Are batteries needed to power the product or is this product a battery : No Is this a Dangerous Good or a Hazardous Material, Substance or Waste that is regulated for transportation, storage, and/or disposal? : No Type : 3D Printer AccessoriesV
ج.م.‏ 45.00 ج.م.‏ 35.00

3x AAA Battery Holder + On/Off Switch

06.11.08
3X AAA BATTERY HOLDER + ON/OFF SWITCH MATERIAL: PLASTIC, METAL CABLE LENGTH : 11CM / 4.7 " COLOR: BLACK NET WEIGHT: 64 GM
ج.م.‏ 30.00 ج.م.‏ 10.00

4 PIN - 2.8mm Connector Male & Female With Terminal

04.00.111
Brand : Other Type : Cable Accessories
ج.م.‏ 11.50 ج.م.‏ 10.00

4 x AA Battery Holder + On/Off Switch

06.16.08
4X AA BATTERY HOLDER + ON/OFF SWITCH MATERIAL: PLASTIC, METAL CABLE LENGTH : 11CM / 4.7 " COLOR: BLACK NET WEIGHT: 64 GM
ج.م.‏ 20.00 ج.م.‏ 15.00

4 x AAA Battery Holder + On/Off Switch

06.12.08
4 x AAA Battery Holder + On/Off SwitchMATERIAL: PLASTIC, METAL CABLE LENGTH : 11CM / 4.7 " COLOR: BLACK NET WEIGHT: 64 GM
ج.م.‏ 20.00 ج.م.‏ 15.00

40 Sets 2p 3p 4p 5 Pin 2.54mm Pitch Terminal Housing Header Connector Wire XH

14.00.03
40 sets 2p 3p 4p 5 pin 2.54mm Pitch Terminal Housing Header Connector Wire XH Color‎:‎White Material‎:‎ABS‎(‎Acrylonitrile Butadiene Styrene‎)‎/Stainless Steel Pitch‎:‎2.54mm Current Rating‎:‎ 1A AC‎,‎ DC Voltage Rating‎:‎ 125V AC‎,‎ DC Withstanding Voltage‎:‎ 500V AC/minute Temperature Range‎:‎ ‎-25 deg C ~ +85 deg C Wire Range ‎:‎ AWG#24~#32 Insulation Resistance‎:‎ 100M Omega Min‎.‎ Insulation O‎.‎D‎.‎ ‎:‎ 1.00mm ‎(‎ Max‎.‎‎)‎ Note‎:‎ 1‎.‎Please allow 1‎-3mm error due to manual measurement‎.‎ pls make sure you do not mind before you bid‎.‎ 2‎.‎Due to the difference between different monitors‎,‎ the picture may not reflect the actual color of the item‎.‎ Thank you‎!‎
ج.م.‏ 300.00 ج.م.‏ 260.00

40PCS Jumper Wire Cable 1P-1P 2.54mm 20cm Female to Female For Arduino

05.00.45
Type for selection: Female to Female Quantity: 1 x 40pcs length: 20cm a row including of 40 root Compatible with 2.54mm spacing pin headers High quality and in good working condition Durable and reusable Easy to install and use A popular choice for construction or repair Be used for electronic project and Genuine Arduino product Package Content: 1 x Row of 40PCS 2.54mm 1P-1P Line
ج.م.‏ 40.00 ج.م.‏ 32.00

40PCS Jumper wire Cable 1P-1P Male to Male -length 20cm- arduino

05.00.43
Brand : Arduino Type : Electronic Accessories
ج.م.‏ 40.00 ج.م.‏ 35.00

4mm Banana Plug To 4mm Banana Plug Test Lead Cable Wire For Multimeter Probes

05.00.58
Material: Wire & Conductive Metal Plug size: 4mm Rated current: 15A Voltage: 1000V
ج.م.‏ 50.00 ج.م.‏ 40.00

4PIN To 6PIN 1m Long Cable For Nema 17 Motor

05.00.38
Brand : Other Type : Cables Compatible with : Electronic Accessories
ج.م.‏ 45.00 ج.م.‏ 25.00

4 Position DIP Switch 2.54mm

04.00.67
Brand : Other Type : Smart Sockets
ج.م.‏ 10.00 ج.م.‏ 9.00

5V 4-Phase 28BYJ-48 Stepper Motor + ULN2003 Driver Board

05.00.136
DESCRIPTION: Small size stepper motor ideal for driving mini DIY projects such as mini plotter, 3D printer and mini laser cutter. Rated Voltage: DC5V 4-phase Step angle: 5.625 x 1/64 DC Resistance: 200ω±7% (25C) Insulation Resistance: >10Mω (500V) Dielectric Strength: 600V AC / 1mA / 1s Insulation Grade: A No-load Pull in Frequency: >600Hz No-load Pull out Frequency: >1000Hz Pull in Torque: >34.3mN.m(120Hz) Detent Torque: >34.3mN.m Temperature Rise: <40K(120Hz) Noise: <40dB (120Hz, No load, 10cm) Drive Module Board Size: 2.8 x 2.8 x 2 cm Stepper motor Size: 3.2 x 3.2 cm
ج.م.‏ 120.00 ج.م.‏ 100.00

5V Small Stepper Motor

05.00.135
Voltage: DC 5V Diameter: 28mm Step Angle: 5.625 x 1/64 Reduction Ratio: 1/64
ج.م.‏ 100.00 ج.م.‏ 75.00

6 PIN - 2.8mm Connector Male & Female With Terminal

04.00.112
ج.م.‏ 15.00 ج.م.‏ 11.00

6 Pin Female tall Header Connector socket

04.00.79
Six pin female tall stackable header connector socket for Arduino Shield.
ج.م.‏ 5.00 ج.م.‏ 4.00

6 Position DIP Switch 2.54mm

04.00.68
CONTACT RESISTANCE : 50MΩ 24VDC/100MA (AT INITIAL);100MΠTYPICAL, 24VDC/100MA (AFTER LIFE TEST) : 100MΩ TYPICAL, 24VDC/100MA (AFTER LIFE TEST);EACH SIZE : 12 X 10 X 11 MM / 0.47" X 0.4" X 0.43" (L*W*H)
ج.م.‏ 8.00 ج.م.‏ 11.00

6STARHOBBY CNC Aluminum Alloy Half Servo Arm 1.25-SDS-SA03-B-F

03.00.71
6STARHOBBY CNC Aluminum Alloy Half Servo Arm 1.25-SDS-SA03-B-F
ج.م.‏ 130.00 ج.م.‏ 100.00

727 Power Supply 5V-20A-100W

08.08.02
Input: 110V/220V AC; Output: DC 5V 20A max. Output voltage can be adjusted 15%. Two sets of output Channel. Safety features: Automatic overload cut-off, over Voltage cut-off, automatic thermal cut-off, short circuit protection. It is perfect for all 5V projects, such as WS2811 2801 WS2812B LED Strip Pixel Light, CCTV Camera, Security System, Computer Project, etc. There is no fan inside the case, silent running. Metal case with many holes makes heat dissipation more efficient. Compact small size, high efficiency, high reliability, stable performance. Indoor use only
ج.م.‏ 400.00 ج.م.‏ 350.00

7805 Regulator IC

04.00.140
Brand : Other Type : Electronic Accessories Input voltage range 7V- 35V Current rating Ic = 1A Output voltage range VMax=5.2V ,VMin=4.8V
ج.م.‏ 5.00

8 Pin Female tall Header Connector socket

04.00.77
8 Pin Female tall stackable Header Connector socket for Arduino Shield.
ج.م.‏ 10.00 ج.م.‏ 5.00

8 Position DIP Switch 2.54mm

04.00.69
8 Position DIP Switch 2.54mm
ج.م.‏ 13.00

9 PIN - 2.8mm Connector Male & Female With Terminal

04.00.113
Can be used to connect internal wiring. 2.8mm terminal for cable diameter up to 2.0mm. Can be used on cars, quad bike, tricycle, caravan, motorcycles, scooters, boat, snowmobile, etc. Easy to use,2.8mm 2/3/4/6/9 way connector with fixed hook.
ج.م.‏ 20.00 ج.م.‏ 15.00

9Pin 8S Lipo Balance JST-XH Plug Wire Connector Adapter Plug 20cm

05.00.101
Features ‎:‎ ‎9Pin 8S Lipo Balance JST‎-XH Plug ‎Length‎:‎ 20cm ‎Deal for all types of R/C ‎(‎Cars‎,‎ Boats‎,‎ Planes‎)‎‎.‎ Package included‎:‎ 9Pin 8S Lipo Balance JST‎-XH Plug Wire 9Pin 8S Lipo Balance JST‎-XH Plug Ideal for all types of R/C Color‎:‎ As the picture shown
ج.م.‏ 65.00 ج.م.‏ 45.00

9V Battery Holder with On/Off Switch

06.07.08
9 volt battery Holder with on/off power switch Works with 9V battery also known as: 1604 Easy to remove cover ; Cover slides and secures in place with screw if needed Pre-wired with a 6 inch wires (24 gauge) Pack of 1; Length: 2 3/4 inches or 69.85mm Width = 1 3/8 inches or 35mm Height = 7/8 inch or 22.2mm
ج.م.‏ 25.00 ج.م.‏ 18.00

9V Battery Holder With Plug

06.13.08
9V Battery Holder Material: plastic, Metal Cable length : 11cm / 4.7 Color: Black Net weight: 64 GmPackage Content: 1x 2 x AAA Battery Holder Type : Battery Power Converter
ج.م.‏ 20.00 ج.م.‏ 15.00

9V Battery Holder Without Plug

06.14.08
9V Battery Holder Material: plastic, Metal Cable length : 11cm / 4.7 Color: Black Net weight: 64 GmPackage Content: 1x 2 x AAA Battery Holder Type : Battery Power Converter
ج.م.‏ 32.00 ج.م.‏ 12.00

9V battery snap power cable

05.00.13
Brand new and high quality. Hard plastic T-type connector. Stripped and tinned leads, 1 red and 1 black for easy identification and soldering Snap-on terminal connector for 9-volt battery or for DIY projects. Plug Type: 2.1 x 5.5mm Male to 9V Battery Clip Material(External): PVC Plastic
ج.م.‏ 10.00 ج.م.‏ 5.00