Juthour-Tech.com. CNC Machines

CNC Driver DM542 two-phase hybrid stepper motor driver 4.2A

08.01.01

The DM542E is a fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-configuration feature offers quick setup to optimal modes with different motors. Compared with traditional analog drives, DM542E can drive a stepper motor at much lower noise, lower heating, and smoother movement.

$69.30

ER11 - 35L 5mm With ( Collet 4mm )

11.00.116

Brand : Other Type : Drill Chucks Is It a Set : Yes

$19.20

1605 Ballscrew And Nut 250mm Bearing

05.08.170

Specification‎:‎ Rolling Block Material‎:‎ bearing steel Total length‎:‎250mm Features‎:‎ Screw are used in TBI screw‎,‎ good finish‎,‎ uniform hardness‎,‎ high accuracy‎.‎ Between the feed screw nut having a spiral groove provided with a ball ‎(‎as intermediate transmission member‎)‎‎,‎ to reduce friction‎.‎ High transmission efficiency‎,‎ high positioning accuracy‎,‎ long service life‎,‎ transmission reversibility‎.‎ Caution‎:‎ Do not unscrew the screw nut ‎(‎‎(‎to prevent detachment screw‎)‎

$50.40

5V 4-Phase 28BYJ-48 Stepper Motor + ULN2003 Driver Board

05.00.136

DESCRIPTION: Small size stepper motor ideal for driving mini DIY projects such as mini plotter, 3D printer and mini laser cutter. Rated Voltage: DC5V 4-phase Step angle: 5.625 x 1/64 DC Resistance: 200ω±7% (25C) Insulation Resistance: >10Mω (500V) Dielectric Strength: 600V AC / 1mA / 1s Insulation Grade: A No-load Pull in Frequency: >600Hz No-load Pull out Frequency: >1000Hz Pull in Torque: >34.3mN.m(120Hz) Detent Torque: >34.3mN.m Temperature Rise: <40K(120Hz) Noise: <40dB (120Hz, No load, 10cm) Drive Module Board Size: 2.8 x 2.8 x 2 cm Stepper motor Size: 3.2 x 3.2 cm

$5.40

5V Small Stepper Motor

05.00.135

Voltage: DC 5V Diameter: 28mm Step Angle: 5.625 x 1/64 Reduction Ratio: 1/64

$3.60

DC Geared Motors for Robots Straight Shaft

05.00.139

This DC geared motor can be connected directly to our robot tires without any couplings. This is an advantage as it reduce assembly COMPLICATIONS. SPECIFICATIONS• VOLTAGE: 4.5 V DC• NO LOAD SPEED: 90 +/- 10RPM • NO LOAD CURRENT: 190MA (MAX.250MA) • MINIMUM TORQUE: 800 GM.CM

$1.80

DC motor 775 12V

08.09.03

Model 775 Shaft Diameter 5mm Shaft length 17mm Body length 66.7mm Front steps diameter 17.4 mm Former high level 4.7 mm Body diameter 42 mm Motor Overall Length 98 mm Diagonal installation pitch 28.8 mm Mounting hole size M4 Mounting hole 2 Torque 2kg.cm or 0.2N.M

$18.00

DC motor 775 36v

08.05.03

Model 775 Shaft Diameter 5mm Shaft length 17mm Body length 66.7mm Front steps diameter 17.4 mm Former high level 4.7 mm Body diameter 42 mm Motor Overall Length 98 mm Diagonal installation pitch 28.8 mm Mounting hole size M4 Mounting hole 2 Torque 2kg.cm or 0.2N.M 35v

$39.00

NEMA 17 STEPPER MOTOR, 48MM, HD48002_22B, Silver Black

08.02.03

THESE ARE POWERFUL NEMA 17 STEPPER MOTORS FOR 3D PRINTERS AND CNC MACHINES. INCLUDES 1 METER CABLE

$21.00

ER11 a - 8mm Drill Chucks

11.00.117

Products: motor shaft clamping knife pouch Unit: Support / contain nuts top wire, not include chuck and six angular key Model: ER16 Nut: ER16A type six pistol nut diameter 19mm Body length: 34mm, contains nut 40mm Hole shaft 8mm (-0.02) is required for installation of heating expansion Material: 40 chrome

$9.00

5 Axis CNC Breakout Interface Board

03.00.65

Model: CNC-INTERFACE5 Location : A4-1 Weight: 0.90kg

$16.80

J3030 PCB Machine Full Kit

PCB.30.FK

PCB milling has advantages for both prototyping and some special PCB designs. Probably the biggest benefit is that one doesn't have to use chemicals to produce PCBs. When creating a prototype, outsourcing a board takes time. Alternative is to make a PCB in-house. Using the wet process, in-house production presents problems with chemicals and disposing thereof. High-resolution boards using the wet process are hard to achieve and still, when done, one still has to drill and eventually cut out the PCB from the base material. CNC machine prototyping can provide a fast-turnaround board production process without the need for wet processing. If a CNC machine is already used for drilling, this single machine could carry out both parts of the process, drilling and milling. A CNC machine is used to process drilling, milling and cutting. Many boards that are simple for milling would be very difficult to process by wet etching and manual drilling afterward in a laboratory environment without using top of the line systems that usually cost multiple times more than CNC milling machines. In mass production, milling is unlikely to replace etching although the use of CNC is already standard practice for drilling the boards.

$420.00