3D Printer Hot End

View as Grid List
Sort by
Display per page

0.25mm V5 V6 j Head Brass Nozzel for 3d Printer 1.75 mm Extruder

04.00.197
Brand : Other Type : 3D Printer Accessories
$2.10 $1.50

3D Printer Cartridge Heater Reprap 12V 30W

06.06.05
CARTRIDGE HEATER REPRAP 12V 30W 6X20MM CERAMIC FOR 3D PRINTER PRUSA MENDEL 12V30W VOLTAGE:12V POWER: 30W CORE: CERAMIC DIAMETER: 6MM LENGHT: 30MM LEAD WIRE LENGHT: 100CM CARTRIDGE HEATERS IS CONSIST OF A CYLINDRICAL STAINLESS STEEL TUBE AND THUS PROVIDE A HIGH CORROSION PREVENTION. THE HEATING WIRE INSIDE WHICH IS WOUND ONTO A CERAMIC CORE. THE SOLIDS, LIQUIDS, AND GASES NEED TO BE HEATED BY CARTRIDGE HEATER, TRANSMIT HEAT QUICKLY BY CONDUCTION IF THE PRODUCER OF THE HEAT (THE CARTRIDGE) IS IN DIRECT CONTACT WITH THE HEAT SINK (ANY SOLID, LIQUID, OR GAS). WIDELY USED FOR MANUFACTURING PLASTIC AND RUBBER PARTS IN THE CAR INDUSTRY OR IN THE FOOD PROCESSING INDUSTRY, 3D PRINTERS, ETCCARTRIDGE HEATER REPRAP 12V 30W 6X20MM CERAMIC FOR 3D PRINTER PRUSA MENDEL 12V30W VOLTAGE:12V POWER: 30W CORE: CERAMIC DIAMETER: 6MM LENGHT: 30MM LEAD WIRE LENGHT: 100CM CARTRIDGE HEATERS IS CONSIST OF A CYLINDRICAL STAINLESS STEEL TUBE AND THUS PROVIDE A HIGH CORROSION PREVENTION. THE HEATING WIRE INSIDE WHICH IS WOUND ONTO A CERAMIC CORE. THE SOLIDS, LIQUIDS, AND GASES NEED TO BE HEATED BY CARTRIDGE HEATER, TRANSMIT HEAT QUICKLY BY CONDUCTION IF THE PRODUCER OF THE HEAT (THE CARTRIDGE) IS IN DIRECT CONTACT WITH THE HEAT SINK (ANY SOLID, LIQUID, OR GAS). WIDELY USED FOR MANUFACTURING PLASTIC AND RUBBER PARTS IN THE CAR INDUSTRY OR IN THE FOOD PROCESSING INDUSTRY, 3D PRINTERS, ETCCARTRIDGE HEATER REPRAP 12V 30W 6X20MM CERAMIC FOR 3D PRINTER PRUSA MENDEL 12V30W VOLTAGE:12V POWER: 30W CORE: CERAMIC DIAMETER: 6MM LENGHT: 30MM LEAD WIRE LENGHT: 100CM CARTRIDGE HEATERS IS CONSIST OF A CYLINDRICAL STAINLESS STEEL TUBE AND THUS PROVIDE A HIGH CORROSION PREVENTION. THE HEATING WIRE INSIDE WHICH IS WOUND ONTO A CERAMIC CORE. THE SOLIDS, LIQUIDS, AND GASES NEED TO BE HEATED BY CARTRIDGE HEATER, TRANSMIT HEAT QUICKLY BY CONDUCTION IF THE PRODUCER OF THE HEAT (THE CARTRIDGE) IS IN DIRECT CONTACT WITH THE HEAT SINK (ANY SOLID, LIQUID, OR GAS). WIDELY USED FOR MANUFACTURING PLASTIC AND RUBBER PARTS IN THE CAR INDUSTRY OR IN THE FOOD PROCESSING INDUSTRY, 3D PRINTERS, ETC
$2.40

3D Printer Multi Color 3 IN 1 Out

03.01.54
The Diamond Nozzle is a brass nozzle for 3D printing in multiple colors and materials. It has five filament inputs for 1.75mm filament and a common 0.4mm nozzle orifice. The Diamond Nozzle is designed with the smallest possible mixing chamber, to make color shifts as fast as possible and avoid unnecessary filament waste. To ensure rapid nozzle heat up the nozzle have been constructed as compact as possible and features a cutout for standard 40W heater cartridge and leaded thermistor BENEFITS OF THE DIAMOND NOZZLE Easy calibration Better precision compared to multi-nozzle printing Prints with 5 different colors Minimal filament waste 5 inputs for 1.75 mm filament Common 0.4 mm nozzle orifice Smallest possible mixing chamber for minimal waste and fast color change Cutout for standard OD6mm heater cartridge and leaded thermistor 5 threaded mounting holes for special designed heat sinks DIAMOND NOZZLE FEATURES 5 inputs for 1.75 mm filament Common 0.4 mm nozzle orifice Smallest possible mixing chamber for minimal waste and fast color change Cutout for standard OD 6mm heater cartridge and leaded thermistor 5 threaded mounting holes for special designed heat sinks
$9.00

3d printer throat PTFE inside stainless steel feed tube

04.00.96
PRODUCT DETAILS THIS HOT END THREADED PIPE CONNECT THE FILAMENT TO INJECTION NOZZLE. THE FILAMENT MELT IN ,THIS PIPE AND CHANGE FROM SOLID CONDITION TO LIQUID CONDITION. MATERIAL: STAINLESS STEEL TYPE : 3D PRINTER THROAT LENGTH : 26MM MATERIAL : STAINLESS STEEL THROAT DIAMETER : M6 SCREW OUTER DIAMETER : 6MM PTFE INNER DIAMETER : 2MM PTFE OUTER DIAMETER : 4MM PTFE LENGTH : 20MM
$2.10

0.5mm V5 V6 j Head Brass Nozzel for 3d Printer 1.75 mm Extruder

04.00.194
NAME :V5 V6 J HEAD BRASS NOZZLE MATERIAL: BRASS NOZZEL DIAMETER: 0.5MM
$2.10 $1.50

MK8 aluminium block

04.00.18
MK8 THE HEATING HEAD HEATING BLOCK FOR 3 D PRINTER. MATERIAL:ALUMINUM. SIZE : 20MMX20MMX10MM. HOLE : M6 SCREW THREAD. ACCECPT M6 SCREW THREAD NOZZLE.
$1.50

0.4mm Volcano Nozzle for 3D Printer ( Stainless Steel )

04.00.212
VOLCANO NOZZLE ALLOWS YOU TO PRINT IN HIGH LAYER OF HEIGHTS, THROUGH LARGE NOZZLES, AND DRAW MUCH MORE PLASTIC PER SECOND 1.75MM FILAMENT NOZZLE SIZE 0.4MM MATERIAL: STAINLESS STEEL PACKING INCLUDED: 1X VOLCANO NOZZLE (0.4MM)
$3.60

1 meter 3D Printer PTFE Teflon Tube Remote Nozzle feed Guide 3 x 4

05.03.03
EXCELLENT CORROSION RESISTANCE --- CAN WITHSTAND MOLTEN ALKALI METAL FLUORIDE, MEDIUM, AND HIGHER THAN 300 IN ADDITION TO THE ROLE OF ALL ACID ADDITION ℃ SODIUM HYDROXIDE (INCLUDING AQUA REGIA), STRONG OXIDIZING AGENTS, REDUCING AGENTS AND VARIOUS ORGANIC SOLVENTS
$3.90

1mm V5 V6 j Head Brass Nozzel for 3d Printer 1.75 mm Extruder

04.00.190
NOZZEL MATERIAL BRASS NOZZEL DIAMETER 1MM
$2.10 $1.50

NTC 3950 Thermistors-small head Size with dupont

06.02.05
NTC 3950 Thermistors-small head Size with dupont Upgrade from the original ordinary temperature probe directly exposed temperature measurement to resistance package temperature measurement. Temperature measurement head cylinder diameter 3mm, length 15mm, can be used with the heating block that support the thermocouple. The temperature measurement range is increased from -50 ℃~ +250℃ to -50 ℃ ~ +350 ℃. It helps a lot to print high-temperature filament, can replace the original K-type thermocouple temperature. If need to print high-temperature filament, the HT-NTC100K thermistors are highly recommended. The new version of HT-NTC100K temperature measuring thermistor adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement. HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off. Supports the customization of different specifications, including the temperature head cylinder size, length of the wires (MOQ is 100 sets). Can be used with the new version of the heater (the new heater can heat up to 350 degrees). Operating temperature range:-50~+350°C Package Include : 1X NTC 3950 Thermistors-small head Size with dupont
$3.00

0.6mm V5 V6 j Head Brass Nozzel for 3d Printer 1.75 mm Extruder

04.00.195
3D INNOVATIONS EXTRUDER NOZZLE FOR 3D PRINTER, COMPATIBLE WITH E3D V6 AND E3D V5 J-HEAD HOTEND AND M6 THREADED EXTRUDER 1.75MM FILAMENT NOZZLE SIZE 0.6MM PACKING INCLUDED: 1X 3D PRINTER NOZZLE (0.6MM)
$2.10 $1.50

V6 Stock for 3D Printers

04.00.39
THESE SOCKS WILL KEEP YOUR NOZZLE CLEAN AND FREE OF BURNT ON BLACKENED PLASTIC. THEY DON’T JUST KEEP THE NOZZLE CLEAN, BUT ALSO KEEP HEAT INSIDE THE HOTEND, AND OFF THE PRINT. MADE OF A HEAT-RESISTANT, NON-STICK SILICONE MATERIAL THAT WILL REPEL BUILD-UP OF MOLTEN PLASTIC. THIS REALLY HELPS WITH STICKY MATERIALS LIKE CO-POLYESTERS AND FILLED MATERIALS THAT LIKE TO BUILD UP ON NOZZLES. THESE ALSO OFFER A HUGE BOOST IN TEMPERATURE STABILITY, PARTICULARLY IF YOU USE HIGH AIRFLOW COOLING AROUND THE NOZZLE TO COOL THE PRINT. THE ADDITIONAL COOLING COMBINED WITH REDUCED RADIATION OF HEAT FROM THE BLOCK AND NOZZLE TO THE PRINT REALLY BOOST THE ABILITY TO PRINT GREAT OVERHANGS AND BRIDGES, ALL WHILE KEEPING THE HOTEND TEMPERATURE EXTREMELY STABLE. SOCKS DON'T LAST FOREVER. DEPENDING ON WHAT MATERIALS YOU PRINT AND HOW MUCH ABUSE THEY GET THEY EVENTUALLY WEAR AWAY AT THE NOZZLE TIP. EVEN WITH STICKY ABRASIVE MATERIALS AND A BIT OF ABUSE THEY SHOULD EASILY LAST 100+ PRINT HOURS. WITH LESS STICKY MATERIALS LIKE ABS AND GENTLER USE YOU CAN GET ALMOST INFINITE LIFE. PACKAGE : 1 XV6 ORIGINAL STOCK
$4.50

0.3mm V5 V6 j Head Brass Nozzel for 3d Printer 1.75 mm Extruder

04.00.192
Nozzel Material Brass Nozzel Diameter 0.3mm
$2.10 $1.50

E3D V6 Long distance J-head Hotend with Cooling fan ,heater,thermistor and fan duct built-in for 1.75mm 3D Printer

03.00.56
E3D V6 Long distance J-head Hotend with Cooling fan ,heater,thermistor and fan duct built-in for 1.75mm 3D Printer
$13.50

0.8mm V5 V6 j Head Brass Nozzel for 3d Printer 1.75 mm Extruder

04.00.196
NAME :V5 V6 J HEAD BRASS NOZZLE MATERIAL: BRASS NOZZEL DIAMETER: 0.8MM
$2.10 $1.50

Volcano block with 0.6mm 0.8mm 1mm and 1.2mm Long Nozzels for V6 J Hot End 1.75 3d Printers

518.00465.546
Volcano Block Material: Aluminium Alloy Plus 4 long Volcano Brass Nozzles of Diameters 0.6mm 0.8mm 1mm and 1.2mm
$19.20

0.2mm V5 V6 j Head Brass Nozzel for 3d Printer 1.75 mm Extruder

04.00.191
Nozzel Material Brass Nozzel Diameter 0.2mm
$2.10 $1.50

E3D V6 Hotend Kit with Volcano Nozzle and Cooling fan All Metal J-head for 1.75mm

03.00.66
(0.6/1.75mm, 12V40W), 0.6/0.8/1.0/1.2mm Nozzle for option. For the heating pipe, 12V40W and 24V40W for option. 12V/24V for the coling fan. Modified from the E3D V6 Kit, the feeding pipe and heat cooling tube are the same as E3D V6, the heating block and the nozzle are Volcano ones, suit for the large-scale 3D printing. Package list: E3D V6 Volcano print head * 1pc (default heating pipe 12V .
$22.80

0.8mm Volcano Nozzle for 3D Printer ( Stainless Steel )

04.00.214
VOLCANO NOZZLE ALLOWS YOU TO PRINT IN HIGH LAYER OF HEIGHTS, THROUGH LARGE NOZZLES, AND DRAW MUCH MORE PLASTIC PER SECOND 1.75MM FILAMENT NOZZLE SIZE 0.8 MM MATERIAL: STAINLESS STEEL PACKING INCLUDED: 1X VOLCANO NOZZLE (0.8MM)
$3.60

kapton tape 10mm x 30m

06.02.11
This Product is a high temperature resistant adhesive tape. This single sided tape consists of a Kapton polyimide film with a silicone adhesive, compatible with a wide temperature range. Kapton tape with silicone adhesive exhibits better adhesion to "difficult surfaces", but at the same time the high adhesive film bond greatly reduces adhesive transfer to leave a cleaner surface. Use as electrical insulation for transformer, motor, coil, capacitor and frequency conversion power supply in electronic industry Long-term temperature: 260°C / short-term temperature: 300°C Size: 10mm x 30m Package:1 x High Temperature Tape Length: 30 Meter
$2.70

0.8mm E3D V5&V6 J-head Nozzles ( Stainless Steel )

04.00.201
3D INNOVATIONS EXTRUDER NOZZLE FOR 3D PRINTER, COMPATIBLE WITH E3D V6 AND E3D V5 J-HEAD HOTEND AND M6 THREADED EXTRUDER 1.75MM FILAMENT NOZZLE SIZE 0.8MM PACKING INCLUDED: 1X 3D PRINTER NOZZLE (0.8MM)
$2.40 $1.80

0.4mm MK8 Extruder Nozzle ( Stainless Steel )

04.00.186
This Extruder nozzle is a perfect match to the 3D printer Nozzle 1.75MM FILAMENT NOZZLE SIZE 0.4MM PACKAGE INCLUDES:1 X EXTRUDER NOZZLE PRINT HEAD (0.4MM)
$2.40

0.4mm E3D V5&V6 J-head Nozzles (STainless Steel )

04.00.199
3D INNOVATIONS EXTRUDER NOZZLE FOR 3D PRINTER, COMPATIBLE WITH E3D V6 AND E3D V5 J-HEAD HOTEND AND M6 THREADED EXTRUDER 1.75MM FILAMENT NOZZLE SIZE 0.4MM PACKING INCLUDED: 1X 3D PRINTER NOZZLE (0.4MM)
$2.40 $1.80